Simulating Signal Aberration and Ranging Error for Ultrasonic Indoor Positioning
Increasing efforts toward the development of positioning techniques testify the growing interest for indoor position-based applications and services. Many applications require accurate indoor positioning or tracking of people and assets, and some market sectors are starting a rapid growth of products based on these technologies. Ultrasonic systems have already been demonstrating their effectiveness and to possess the desired positioning accuracy and refresh rates. In this work, it is shown that a typical signal used in ultrasonic positioning systems to estimate the range between the target and reference points-namely, the linear chirp-due to the effects of acoustic diffraction, in some cases, undergoes a shape aberration, depending on the shape and size of the transducer and on the angle under which the transducer is seen by the receiver. In the presence of such signal shape aberrations, even one of the most robust ranging techniques, which is based on cross-correlation, provides results affected by a much greater error than expected. Numerical simulations are carried out for a typical ultrasonic chirp, ultrasonic emitter, and range technique based on cross-correlation and for a typical office room, obtained using the academic acoustic simulation software Field II. Spatial distributions of the ranging error are provided, clearly showing the favorable low error regions. The work demonstrates that particular attention must be paid to the design of the acoustic section of the ultrasonic positioning systems, considering both the shape and size of the ultrasonic emitters and the shape of the acoustic signal used.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2020 |
|---|---|
| Erschienen: |
2020 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:20 |
|---|---|
| Enthalten in: |
Sensors (Basel, Switzerland) - 20(2020), 12 vom: 23. Juni |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Carotenuto, Riccardo [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Acoustic diffraction |
|---|
| Anmerkungen: |
Date Completed 06.07.2020 Date Revised 23.07.2020 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/s20123548 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM311642217 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM311642217 | ||
| 003 | DE-627 | ||
| 005 | 20231225142704.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2020 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/s20123548 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1038.xml |
| 035 | |a (DE-627)NLM311642217 | ||
| 035 | |a (NLM)32585908 | ||
| 035 | |a (PII)E3548 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Carotenuto, Riccardo |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Simulating Signal Aberration and Ranging Error for Ultrasonic Indoor Positioning |
| 264 | 1 | |c 2020 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Completed 06.07.2020 | ||
| 500 | |a Date Revised 23.07.2020 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a Increasing efforts toward the development of positioning techniques testify the growing interest for indoor position-based applications and services. Many applications require accurate indoor positioning or tracking of people and assets, and some market sectors are starting a rapid growth of products based on these technologies. Ultrasonic systems have already been demonstrating their effectiveness and to possess the desired positioning accuracy and refresh rates. In this work, it is shown that a typical signal used in ultrasonic positioning systems to estimate the range between the target and reference points-namely, the linear chirp-due to the effects of acoustic diffraction, in some cases, undergoes a shape aberration, depending on the shape and size of the transducer and on the angle under which the transducer is seen by the receiver. In the presence of such signal shape aberrations, even one of the most robust ranging techniques, which is based on cross-correlation, provides results affected by a much greater error than expected. Numerical simulations are carried out for a typical ultrasonic chirp, ultrasonic emitter, and range technique based on cross-correlation and for a typical office room, obtained using the academic acoustic simulation software Field II. Spatial distributions of the ranging error are provided, clearly showing the favorable low error regions. The work demonstrates that particular attention must be paid to the design of the acoustic section of the ultrasonic positioning systems, considering both the shape and size of the ultrasonic emitters and the shape of the acoustic signal used | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a acoustic diffraction | |
| 650 | 4 | |a acoustic signal aberration | |
| 650 | 4 | |a cross-correlation aberration | |
| 650 | 4 | |a ultrasonic ranging | |
| 700 | 1 | |a Merenda, Massimo |e verfasserin |4 aut | |
| 700 | 1 | |a Iero, Demetrio |e verfasserin |4 aut | |
| 700 | 1 | |a G Della Corte, Francesco |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Sensors (Basel, Switzerland) |d 2007 |g 20(2020), 12 vom: 23. Juni |w (DE-627)NLM187985170 |x 1424-8220 |7 nnns |
| 773 | 1 | 8 | |g volume:20 |g year:2020 |g number:12 |g day:23 |g month:06 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/s20123548 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 20 |j 2020 |e 12 |b 23 |c 06 | ||