Relating mechanical strength at the stem level to values obtained from defect-free wood samples

Abstract Stem or branch failure is a recurrent problem in silviculture and arboriculture. The risk of rupture varies with species in relation to the inherent mechanical properties of the species and the presence of defects. In general, calculations of critical loads for breakage are based on mechanical properties determined from defect-free samples and adjustment factors that try to scale up to full trees that include defects. This study aims at developing an objective method to scale up mechanical resistance to breakage from defect-free samples to full trees, including different types of defects. It combines two approaches. In the first one, a correction factor is determined from a meta-analysis of various tree-pulling studies involving balsam fir [Abies balsamea (L.) Mill.], white spruce [Picea glauca (Moench) Voss], jack pine [Pinus banksiana Lamb.], and black spruce [Picea mariana (Mill.) B.S.P.]. The second approach consists in obtaining empirical data from three-point bending tests using 8-foot (2.44 m) logs with various amounts of decay. Results show that the correction required varies according to the species and the presence of some defects. For balsam fir, which was the species showing the most important difference between whole log and small sample values, differences in correction factors were found between tree-pulling tests and three-point bending tests. Data from winching tests tend to underestimate the stem’s resistance to breakage since they likely represent the weakest trees among those tested. No relationship was found between the adjustment factors and different indices used in arboriculture to account for decay, showing the complexity of mechanical resistance at the stem level..

Medienart:

E-Artikel

Erscheinungsjahr:

2010

Erschienen:

2010

Enthalten in:

Zur Gesamtaufnahme - volume:24

Enthalten in:

Trees - 24(2010), 6 vom: 22. Aug., Seite 1127-1135

Sprache:

Englisch

Beteiligte Personen:

Ruel, Jean-Claude [VerfasserIn]
Achim, Alexis [VerfasserIn]
Herrera, Raul Espinoza [VerfasserIn]
Cloutier, Alain [VerfasserIn]

Links:

Volltext [lizenzpflichtig]

BKL:

48.00$jLand- und Forstwirtschaft: Allgemeines

Themen:

Balsam fir
Decay
Mechanical resistance
Stem breakage
Windthrow

RVK:

RVK Klassifikation

Anmerkungen:

© Springer-Verlag 2010

doi:

10.1007/s00468-010-0485-y

funding:

Förderinstitution / Projekttitel:

PPN (Katalog-ID):

OLC2106821018

Zugang & Verfügbarkeit




Zugehörige Publikationen/Bände

    Haven't found what you're looking for?