Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method
Abstract In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5 hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600 mg/mL), temperature (T) of reaction system (303 K and 333 K [30 °C and 60 °C]), stirring times (ST) of reaction media (4 and 12 hours), stirring speed (SS) being adjusted to 400 and 600 rpm, and rinsing times (RT) of remained filtrates (1 and 3 hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using $ L_{8} $ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3 hours), RS2 (2 molar NaOH), P/S2 (100/600 mg/mL), T2 (333 K [60 °C]), ST2 (12 hours), SS1 (400 rpm), and RT1 (1 hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method..
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2012 |
---|---|
Erschienen: |
2012 |
Enthalten in: |
Zur Gesamtaufnahme - volume:43 |
---|---|
Enthalten in: |
Metallurgical and materials transactions / B - 43(2012), 6 vom: 01. Sept., Seite 1269-1276 |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Parvizi, Reza [VerfasserIn] |
---|
Links: |
Volltext [lizenzpflichtig] |
---|
BKL: | |
---|---|
Themen: |
Extraction Percentage |
Anmerkungen: |
© The Minerals, Metals & Materials Society and ASM International 2012 |
---|
doi: |
10.1007/s11663-012-9709-4 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
OLC2088264132 |
---|
LEADER | 01000naa a22002652 4500 | ||
---|---|---|---|
001 | OLC2088264132 | ||
003 | DE-627 | ||
005 | 20230303061951.0 | ||
007 | cr uuu---uuuuu | ||
008 | 230303s2012 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.1007/s11663-012-9709-4 |2 doi | |
035 | |a (DE-627)OLC2088264132 | ||
035 | |a (DE-He213)s11663-012-9709-4-e | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
082 | 0 | 4 | |a 620 |a 660 |q VZ |
084 | |a 19,1 |2 ssgn | ||
084 | |a 51.50$jMetallische Werkstoffe: Allgemeines |2 bkl | ||
084 | |a 58.41$jHüttenwesen |2 bkl | ||
100 | 1 | |a Parvizi, Reza |e verfasserin |4 aut | |
245 | 1 | 0 | |a Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method |
264 | 1 | |c 2012 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a Computermedien |b c |2 rdamedia | ||
338 | |a Online-Ressource |b cr |2 rdacarrier | ||
500 | |a © The Minerals, Metals & Materials Society and ASM International 2012 | ||
520 | |a Abstract In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5 hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600 mg/mL), temperature (T) of reaction system (303 K and 333 K [30 °C and 60 °C]), stirring times (ST) of reaction media (4 and 12 hours), stirring speed (SS) being adjusted to 400 and 600 rpm, and rinsing times (RT) of remained filtrates (1 and 3 hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using $ L_{8} $ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3 hours), RS2 (2 molar NaOH), P/S2 (100/600 mg/mL), T2 (333 K [60 °C]), ST2 (12 hours), SS1 (400 rpm), and RT1 (1 hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method. | ||
650 | 4 | |a Vanadium | |
650 | 4 | |a Taguchi Method | |
650 | 4 | |a Mechanical Milling | |
650 | 4 | |a Extraction Percentage | |
650 | 4 | |a FeV2O4 | |
700 | 1 | |a Khaki, Jalil Vahdati |4 aut | |
700 | 1 | |a Moayed, Mohammad Hadi |4 aut | |
700 | 1 | |a Ardani, Mohammad Rezaei |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Metallurgical and materials transactions / B |d Springer US, 1975 |g 43(2012), 6 vom: 01. Sept., Seite 1269-1276 |h Online-Ressource |w (DE-627)325572062 |w (DE-600)2037524-4 |w (DE-576)267568703 |x 1543-1916 |7 nnns |
773 | 1 | 8 | |g volume:43 |g year:2012 |g number:6 |g day:01 |g month:09 |g pages:1269-1276 |
856 | 4 | 0 | |u https://dx.doi.org/10.1007/s11663-012-9709-4 |z lizenzpflichtig |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a SYSFLAG_A | ||
912 | |a GBV_OLC | ||
912 | |a GBV_ILN_11 | ||
912 | |a GBV_ILN_20 | ||
912 | |a GBV_ILN_22 | ||
912 | |a GBV_ILN_23 | ||
912 | |a GBV_ILN_24 | ||
912 | |a GBV_ILN_31 | ||
912 | |a GBV_ILN_32 | ||
912 | |a GBV_ILN_39 | ||
912 | |a GBV_ILN_40 | ||
912 | |a GBV_ILN_60 | ||
912 | |a GBV_ILN_62 | ||
912 | |a GBV_ILN_63 | ||
912 | |a GBV_ILN_65 | ||
912 | |a GBV_ILN_69 | ||
912 | |a GBV_ILN_70 | ||
912 | |a GBV_ILN_73 | ||
912 | |a GBV_ILN_74 | ||
912 | |a GBV_ILN_90 | ||
912 | |a GBV_ILN_95 | ||
912 | |a GBV_ILN_100 | ||
912 | |a GBV_ILN_105 | ||
912 | |a GBV_ILN_110 | ||
912 | |a GBV_ILN_120 | ||
912 | |a GBV_ILN_138 | ||
912 | |a GBV_ILN_150 | ||
912 | |a GBV_ILN_151 | ||
912 | |a GBV_ILN_161 | ||
912 | |a GBV_ILN_170 | ||
912 | |a GBV_ILN_171 | ||
912 | |a GBV_ILN_187 | ||
912 | |a GBV_ILN_213 | ||
912 | |a GBV_ILN_230 | ||
912 | |a GBV_ILN_250 | ||
912 | |a GBV_ILN_281 | ||
912 | |a GBV_ILN_285 | ||
912 | |a GBV_ILN_293 | ||
912 | |a GBV_ILN_370 | ||
912 | |a GBV_ILN_602 | ||
912 | |a GBV_ILN_636 | ||
912 | |a GBV_ILN_702 | ||
912 | |a GBV_ILN_2001 | ||
912 | |a GBV_ILN_2003 | ||
912 | |a GBV_ILN_2004 | ||
912 | |a GBV_ILN_2005 | ||
912 | |a GBV_ILN_2006 | ||
912 | |a GBV_ILN_2007 | ||
912 | |a GBV_ILN_2008 | ||
912 | |a GBV_ILN_2009 | ||
912 | |a GBV_ILN_2010 | ||
912 | |a GBV_ILN_2011 | ||
912 | |a GBV_ILN_2014 | ||
912 | |a GBV_ILN_2015 | ||
912 | |a GBV_ILN_2020 | ||
912 | |a GBV_ILN_2021 | ||
912 | |a GBV_ILN_2025 | ||
912 | |a GBV_ILN_2026 | ||
912 | |a GBV_ILN_2027 | ||
912 | |a GBV_ILN_2031 | ||
912 | |a GBV_ILN_2034 | ||
912 | |a GBV_ILN_2037 | ||
912 | |a GBV_ILN_2038 | ||
912 | |a GBV_ILN_2039 | ||
912 | |a GBV_ILN_2044 | ||
912 | |a GBV_ILN_2048 | ||
912 | |a GBV_ILN_2049 | ||
912 | |a GBV_ILN_2055 | ||
912 | |a GBV_ILN_2057 | ||
912 | |a GBV_ILN_2059 | ||
912 | |a GBV_ILN_2061 | ||
912 | |a GBV_ILN_2064 | ||
912 | |a GBV_ILN_2065 | ||
912 | |a GBV_ILN_2068 | ||
912 | |a GBV_ILN_2070 | ||
912 | |a GBV_ILN_2086 | ||
912 | |a GBV_ILN_2088 | ||
912 | |a GBV_ILN_2093 | ||
912 | |a GBV_ILN_2106 | ||
912 | |a GBV_ILN_2107 | ||
912 | |a GBV_ILN_2108 | ||
912 | |a GBV_ILN_2110 | ||
912 | |a GBV_ILN_2111 | ||
912 | |a GBV_ILN_2112 | ||
912 | |a GBV_ILN_2113 | ||
912 | |a GBV_ILN_2116 | ||
912 | |a GBV_ILN_2118 | ||
912 | |a GBV_ILN_2119 | ||
912 | |a GBV_ILN_2122 | ||
912 | |a GBV_ILN_2129 | ||
912 | |a GBV_ILN_2143 | ||
912 | |a GBV_ILN_2144 | ||
912 | |a GBV_ILN_2147 | ||
912 | |a GBV_ILN_2148 | ||
912 | |a GBV_ILN_2152 | ||
912 | |a GBV_ILN_2153 | ||
912 | |a GBV_ILN_2188 | ||
912 | |a GBV_ILN_2190 | ||
912 | |a GBV_ILN_2232 | ||
912 | |a GBV_ILN_2336 | ||
912 | |a GBV_ILN_2446 | ||
912 | |a GBV_ILN_2470 | ||
912 | |a GBV_ILN_2474 | ||
912 | |a GBV_ILN_2507 | ||
912 | |a GBV_ILN_2522 | ||
912 | |a GBV_ILN_2548 | ||
912 | |a GBV_ILN_4012 | ||
912 | |a GBV_ILN_4035 | ||
912 | |a GBV_ILN_4037 | ||
912 | |a GBV_ILN_4046 | ||
912 | |a GBV_ILN_4112 | ||
912 | |a GBV_ILN_4125 | ||
912 | |a GBV_ILN_4126 | ||
912 | |a GBV_ILN_4242 | ||
912 | |a GBV_ILN_4246 | ||
912 | |a GBV_ILN_4249 | ||
912 | |a GBV_ILN_4251 | ||
912 | |a GBV_ILN_4305 | ||
912 | |a GBV_ILN_4306 | ||
912 | |a GBV_ILN_4307 | ||
912 | |a GBV_ILN_4313 | ||
912 | |a GBV_ILN_4322 | ||
912 | |a GBV_ILN_4323 | ||
912 | |a GBV_ILN_4324 | ||
912 | |a GBV_ILN_4325 | ||
912 | |a GBV_ILN_4326 | ||
912 | |a GBV_ILN_4333 | ||
912 | |a GBV_ILN_4334 | ||
912 | |a GBV_ILN_4335 | ||
912 | |a GBV_ILN_4336 | ||
912 | |a GBV_ILN_4338 | ||
912 | |a GBV_ILN_4393 | ||
912 | |a GBV_ILN_4700 | ||
936 | b | k | |a 51.50$jMetallische Werkstoffe: Allgemeines |q VZ |0 106412973 |0 (DE-625)106412973 |
936 | b | k | |a 58.41$jHüttenwesen |q VZ |0 106420755 |0 (DE-625)106420755 |
951 | |a AR | ||
952 | |d 43 |j 2012 |e 6 |b 01 |c 09 |h 1269-1276 |