Microstructure and Mechanical Properties of Aluminum: Graphene Composites Produced by Powder Metallurgical Method
Abstract Aluminum-based composites containing 0.1-0.7 wt.% graphene were produced by the powder metallurgical process. The microstructure of the nanocomposites was studied using LM, SEM, EDS, TEM, and XRD. A relatively uniform distribution of graphene nano-platelets and compacted agglomerates in composites with different graphene contents was found. A mechanical bond between the nano-platelets and the aluminum matrix was established. Under the conditions used, neither particles nor nanoparticles of $ Al_{4} $$ C_{3} $ are formed. The microhardness and mechanical properties were studied. It was found out they are the highest in the composite containing 0.1% graphene. The change of these properties with the graphene content increasing has the same character. Agglomeration of GNPs occurs in all composites containing graphene, but a part of GNPs remain in a dispersed, non-agglomerated state. The microhardness and mechanical properties depend on this part of individual GNPs. It was proven that the observed increase in the yield strength of the studied composites is due to Orowan's strengthening mechanism. The fracture mechanism of GNPs de-bonding and pull-out from the aluminum matrix of the composite was experimentally proved..
Medienart: |
Artikel |
---|
Erscheinungsjahr: |
2022 |
---|---|
Erschienen: |
2022 |
Enthalten in: |
Zur Gesamtaufnahme - volume:31 |
---|---|
Enthalten in: |
Journal of materials engineering and performance - 31(2022), 12 vom: 25. Mai, Seite 10162-10170 |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Lazarova, Rumyana [VerfasserIn] |
---|
Links: |
Volltext [lizenzpflichtig] |
---|
Themen: |
Aluminum–graphene composites |
---|
Anmerkungen: |
© ASM International 2022 |
---|
doi: |
10.1007/s11665-022-07012-y |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
OLC2080095714 |
---|
LEADER | 01000caa a22002652 4500 | ||
---|---|---|---|
001 | OLC2080095714 | ||
003 | DE-627 | ||
005 | 20230507080716.0 | ||
007 | tu | ||
008 | 230131s2022 xx ||||| 00| ||eng c | ||
024 | 7 | |a 10.1007/s11665-022-07012-y |2 doi | |
035 | |a (DE-627)OLC2080095714 | ||
035 | |a (DE-He213)s11665-022-07012-y-p | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
082 | 0 | 4 | |a 620 |a 660 |a 670 |q VZ |
100 | 1 | |a Lazarova, Rumyana |e verfasserin |4 aut | |
245 | 1 | 0 | |a Microstructure and Mechanical Properties of Aluminum: Graphene Composites Produced by Powder Metallurgical Method |
264 | 1 | |c 2022 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ohne Hilfsmittel zu benutzen |b n |2 rdamedia | ||
338 | |a Band |b nc |2 rdacarrier | ||
500 | |a © ASM International 2022 | ||
520 | |a Abstract Aluminum-based composites containing 0.1-0.7 wt.% graphene were produced by the powder metallurgical process. The microstructure of the nanocomposites was studied using LM, SEM, EDS, TEM, and XRD. A relatively uniform distribution of graphene nano-platelets and compacted agglomerates in composites with different graphene contents was found. A mechanical bond between the nano-platelets and the aluminum matrix was established. Under the conditions used, neither particles nor nanoparticles of $ Al_{4} $$ C_{3} $ are formed. The microhardness and mechanical properties were studied. It was found out they are the highest in the composite containing 0.1% graphene. The change of these properties with the graphene content increasing has the same character. Agglomeration of GNPs occurs in all composites containing graphene, but a part of GNPs remain in a dispersed, non-agglomerated state. The microhardness and mechanical properties depend on this part of individual GNPs. It was proven that the observed increase in the yield strength of the studied composites is due to Orowan's strengthening mechanism. The fracture mechanism of GNPs de-bonding and pull-out from the aluminum matrix of the composite was experimentally proved. | ||
650 | 4 | |a aluminum–graphene composites | |
650 | 4 | |a microstructure | |
650 | 4 | |a mechanical properties | |
650 | 4 | |a powder metallurgy | |
650 | 4 | |a strengthening and fracture mechanisms | |
700 | 1 | |a Mourjeva, Yana |4 aut | |
700 | 1 | |a Petkov, Vesselin |4 aut | |
700 | 1 | |a Anestiev, Lubomir |4 aut | |
700 | 1 | |a Marinov, Marin |4 aut | |
700 | 1 | |a Dimitrova, Rossitza |4 aut | |
700 | 1 | |a Shuleva, Daniela |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Journal of materials engineering and performance |d Springer US, 1992 |g 31(2022), 12 vom: 25. Mai, Seite 10162-10170 |w (DE-627)131147366 |w (DE-600)1129075-4 |w (DE-576)033027250 |x 1059-9495 |7 nnns |
773 | 1 | 8 | |g volume:31 |g year:2022 |g number:12 |g day:25 |g month:05 |g pages:10162-10170 |
856 | 4 | 1 | |u https://doi.org/10.1007/s11665-022-07012-y |z lizenzpflichtig |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a SYSFLAG_A | ||
912 | |a GBV_OLC | ||
912 | |a SSG-OLC-TEC | ||
912 | |a SSG-OLC-PHA | ||
912 | |a SSG-OLC-DE-84 | ||
951 | |a AR | ||
952 | |d 31 |j 2022 |e 12 |b 25 |c 05 |h 10162-10170 |