Special Features of Structure and Phase Transitions of Al – Fe – Cr Alloy under Different Crystallization Conditions in Additive Technologies
The microstructure of alloy Al – 2.5% Fe – 1.5% Cr obtained by crystallization from melt at cooling rates of 0.5 – 940 K/sec and the effect of the type of the initial microstructure on the behavior of the alloy under laser treatment are studied. An x-ray phase analysis of cast alloys is conducted, the solidus temperature and the microstructure are determined. The Thermo-Calc software is used to plot polythermal sections of the Al – Fe – Cr system, and the changes in the mass fraction of the hard phases in the structure are computed. It is shown that elevation of the cooling rate in crystallization of the alloy causes decrease in the concentration of the primary crystals of the $ Al_{45} $$ Cr_{7} $ phase until their total disappearance and formation of a homogeneous microstructure. The surface of the specimens is treated with a laser beam, and then the microstructure of cross sections of the tracks obtained is investigated. This type of surface treatment imitates the impact on the material in additive technologies. Laser treatment of the surface of the alloy raises the hardness substantially (from 43 to 77 HV), which is explainable by formation of a supersaturated aluminum solid solution and a small size of the dendrite cells..
| Medienart: |
Artikel |
|---|
| Erscheinungsjahr: |
2022 |
|---|---|
| Erschienen: |
2022 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:64 |
|---|---|
| Enthalten in: |
Metal science and heat treatment - 64(2022), 1-2 vom: Mai, Seite 101-107 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Loginova, I. S. [VerfasserIn] |
|---|
| Links: |
Volltext [lizenzpflichtig] |
|---|
| Anmerkungen: |
© Springer Science+Business Media, LLC, part of Springer Nature 2022. Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law. |
|---|
| doi: |
10.1007/s11041-022-00768-z |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
OLC2079412914 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | OLC2079412914 | ||
| 003 | DE-627 | ||
| 005 | 20230519000147.0 | ||
| 007 | tu | ||
| 008 | 221220s2022 xx ||||| 00| ||eng c | ||
| 024 | 7 | |a 10.1007/s11041-022-00768-z |2 doi | |
| 035 | |a (DE-627)OLC2079412914 | ||
| 035 | |a (DE-He213)s11041-022-00768-z-p | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 082 | 0 | 4 | |a 670 |a 620 |a 660 |q VZ |
| 100 | 1 | |a Loginova, I. S. |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Special Features of Structure and Phase Transitions of Al – Fe – Cr Alloy under Different Crystallization Conditions in Additive Technologies |
| 264 | 1 | |c 2022 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ohne Hilfsmittel zu benutzen |b n |2 rdamedia | ||
| 338 | |a Band |b nc |2 rdacarrier | ||
| 500 | |a © Springer Science+Business Media, LLC, part of Springer Nature 2022. Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law. | ||
| 520 | |a The microstructure of alloy Al – 2.5% Fe – 1.5% Cr obtained by crystallization from melt at cooling rates of 0.5 – 940 K/sec and the effect of the type of the initial microstructure on the behavior of the alloy under laser treatment are studied. An x-ray phase analysis of cast alloys is conducted, the solidus temperature and the microstructure are determined. The Thermo-Calc software is used to plot polythermal sections of the Al – Fe – Cr system, and the changes in the mass fraction of the hard phases in the structure are computed. It is shown that elevation of the cooling rate in crystallization of the alloy causes decrease in the concentration of the primary crystals of the $ Al_{45} $$ Cr_{7} $ phase until their total disappearance and formation of a homogeneous microstructure. The surface of the specimens is treated with a laser beam, and then the microstructure of cross sections of the tracks obtained is investigated. This type of surface treatment imitates the impact on the material in additive technologies. Laser treatment of the surface of the alloy raises the hardness substantially (from 43 to 77 HV), which is explainable by formation of a supersaturated aluminum solid solution and a small size of the dendrite cells. | ||
| 700 | 1 | |a Sazera, M. V. |4 aut | |
| 700 | 1 | |a Kuskov, K. V. |4 aut | |
| 700 | 1 | |a Popov, N. A. |4 aut | |
| 700 | 1 | |a Khalil, A. M. |4 aut | |
| 700 | 1 | |a Solonin, A. N. |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Metal science and heat treatment |d Springer US, 1959 |g 64(2022), 1-2 vom: Mai, Seite 101-107 |w (DE-627)129596981 |w (DE-600)240858-2 |w (DE-576)015090159 |x 0026-0673 |7 nnns |
| 773 | 1 | 8 | |g volume:64 |g year:2022 |g number:1-2 |g month:05 |g pages:101-107 |
| 856 | 4 | 1 | |u https://doi.org/10.1007/s11041-022-00768-z |z lizenzpflichtig |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a SYSFLAG_A | ||
| 912 | |a GBV_OLC | ||
| 912 | |a SSG-OLC-TEC | ||
| 912 | |a SSG-OLC-PHA | ||
| 912 | |a SSG-OLC-DE-84 | ||
| 951 | |a AR | ||
| 952 | |d 64 |j 2022 |e 1-2 |c 05 |h 101-107 | ||