Thermal performance augmentation in a pipe employing hybrid nanofluid and a plate as turbulator with V-shaped double-winglet ribs
© 2024. The Author(s)..
This article employs a plate with V-shape ribs inside a tube as turbulator to augment the heat transfer rate. The utilized vortex generators are double-winglets arranged in a V-shape placed on both sides of the plate. The proposed system's suggested working fluids are water-based hybrid nanofluids, including Al2O3-Cu/water, Cu-CuO/water, and Cu-TiO2/water. This work involves a numerical evaluation of the effects of the type and volume concentration of the examined hybrid nanofluids on the enhancement of heat transfer. The experimental results are used to validate the numerical model. It is worth mentioning that all the obtained numerical results are compared with the simple tube, without any turbulator (vortex generator) and in the presence of water instead of the hybrid nanofluids. Based on the numerical results, it can be concluded that all employed hybrid nanofluids showed improved thermal performance compared to pure water. Furthermore, the differences between the models are more substantial for higher Reynolds numbers than for lower Reynolds numbers. In Re = 30,000, the Cu-TiO2/water exhibits the lowest thermal performance improvement (augmentation of about 0.3%), while the Cu-CuO/water at Re = 50,000 exhibits the largest thermal performance improvement (augmentation of approximately 5.7%), in the case of ∅1 = ∅2 = 0.5%. For ∅1 = ∅2 = 1%, the Cu-TiO2/water at Re = 30,000 has the lowest thermal performance improvement (augmentation of around 1.1%), while the Cu-CuO/water at Re = 50,000 has the most thermal performance improvement (augmentation of roughly 8.7%). According to the augmentation of around 2.8% at Re = 30,000 for Cu-TiO2/water and approximately 10.8% at Re = 50,000 for Cu-CuO/water, the thermal performance increase in the scenario of ∅1 = ∅2 = 1.5% is the lowest. In Conclusion, the Cu-CuO/water hybrid nanofluid with a volume concentration of ∅1 = ∅2 = 1.5% has the greatest thermal performance value of all the hybrid nanofluids studied.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2024 |
|---|---|
| Erschienen: |
2024 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:14 |
|---|---|
| Enthalten in: |
Scientific reports - 14(2024), 1 vom: 28. März, Seite 7363 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Fan, Zhongmian [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Heat transfer enhancement |
|---|
| Anmerkungen: |
Date Revised 31.03.2024 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.1038/s41598-024-57374-7 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM370382773 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM370382773 | ||
| 003 | DE-627 | ||
| 005 | 20240331233927.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 240330s2024 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1038/s41598-024-57374-7 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1358.xml |
| 035 | |a (DE-627)NLM370382773 | ||
| 035 | |a (NLM)38548748 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Fan, Zhongmian |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Thermal performance augmentation in a pipe employing hybrid nanofluid and a plate as turbulator with V-shaped double-winglet ribs |
| 264 | 1 | |c 2024 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 31.03.2024 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a © 2024. The Author(s). | ||
| 520 | |a This article employs a plate with V-shape ribs inside a tube as turbulator to augment the heat transfer rate. The utilized vortex generators are double-winglets arranged in a V-shape placed on both sides of the plate. The proposed system's suggested working fluids are water-based hybrid nanofluids, including Al2O3-Cu/water, Cu-CuO/water, and Cu-TiO2/water. This work involves a numerical evaluation of the effects of the type and volume concentration of the examined hybrid nanofluids on the enhancement of heat transfer. The experimental results are used to validate the numerical model. It is worth mentioning that all the obtained numerical results are compared with the simple tube, without any turbulator (vortex generator) and in the presence of water instead of the hybrid nanofluids. Based on the numerical results, it can be concluded that all employed hybrid nanofluids showed improved thermal performance compared to pure water. Furthermore, the differences between the models are more substantial for higher Reynolds numbers than for lower Reynolds numbers. In Re = 30,000, the Cu-TiO2/water exhibits the lowest thermal performance improvement (augmentation of about 0.3%), while the Cu-CuO/water at Re = 50,000 exhibits the largest thermal performance improvement (augmentation of approximately 5.7%), in the case of ∅1 = ∅2 = 0.5%. For ∅1 = ∅2 = 1%, the Cu-TiO2/water at Re = 30,000 has the lowest thermal performance improvement (augmentation of around 1.1%), while the Cu-CuO/water at Re = 50,000 has the most thermal performance improvement (augmentation of roughly 8.7%). According to the augmentation of around 2.8% at Re = 30,000 for Cu-TiO2/water and approximately 10.8% at Re = 50,000 for Cu-CuO/water, the thermal performance increase in the scenario of ∅1 = ∅2 = 1.5% is the lowest. In Conclusion, the Cu-CuO/water hybrid nanofluid with a volume concentration of ∅1 = ∅2 = 1.5% has the greatest thermal performance value of all the hybrid nanofluids studied | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a Heat transfer enhancement | |
| 650 | 4 | |a Nanofluid | |
| 650 | 4 | |a Passive method | |
| 650 | 4 | |a Turbulator | |
| 650 | 4 | |a Vortex generator | |
| 700 | 1 | |a Wang, Lingxiao |e verfasserin |4 aut | |
| 700 | 1 | |a Liu, Changjun |e verfasserin |4 aut | |
| 700 | 1 | |a Abdollahi, Seyyed Amirreza |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Scientific reports |d 2011 |g 14(2024), 1 vom: 28. März, Seite 7363 |w (DE-627)NLM215703936 |x 2045-2322 |7 nnns |
| 773 | 1 | 8 | |g volume:14 |g year:2024 |g number:1 |g day:28 |g month:03 |g pages:7363 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.1038/s41598-024-57374-7 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 14 |j 2024 |e 1 |b 28 |c 03 |h 7363 | ||