Evaluation of enamel surface integrity after orthodontic bracket debonding : comparison of three different system
© 2024. The Author(s)..
OBJECTIVE: This study aimed to evaluate enamel surface integrity and time consumed during residual cement removal after bracket debonding using different adhesive removal burs with and without a dental loupe.
MATERIAL AND METHODS: Sixty human-extracted premolars were collected, cleaned, mounted, and prepared for orthodontic bracket bonding. Teeth were randomly divided into three main groups (n = 20) based on the adhesive removal method: tungsten carbide system (TC), sof-lex discs system (SD), and diamond system (DB) groups. Then, each group was subdivided into two subgroups (naked eye and magnifying loupe subgroups). The brackets were bonded and then debonded after 24 h, and the Adhesive Remnant Index (ARI) was assessed. The adhesive remnants were removed by different systems, and the final polishing was performed by Silicone OneGloss. The enamel surface roughness was evaluated before bracketing (T0), after residual cement removal (T1), and finally after polishing (T2) using surface Mitutoyo SJ-210 profilometry and Scanning Electron Microscopy (SEM) to determine the Enamel Damage Index (EDI) score. The time consumed for adhesive removal was recorded in seconds.
RESULTS: The Kruskal Wallis test showed a statistically significant difference in roughness values at T1 compared to T2 between subgroups (p < 0.001). When comparing EDI at T1 and T2, the Kruskal-Wallis H-test showed statistically significant differences in all subgroups. The pairwise comparisons revealed that EDI scores showed a statistically significant difference at T1 and T2 between DB vs. TC and SD (p = 0.015) but not between TC vs. SD (p = 1.000), indicating the highest roughness value observed in the DB group. The time for cement removal was significantly shorter in the magnifying loupe group than in the naked eye group and was shortest with the TC group, whereas the time was the longest with the DB group (p < 0.05).
CONCLUSION: All three systems were clinically satisfactory for residual orthodontic adhesive removal. However, TC system produced the lowest enamel roughness, while the DB system created the greatest. The polishing step created smoother surfaces regardless of the systems used for resin removal.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2024 |
|---|---|
| Erschienen: |
2024 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:24 |
|---|---|
| Enthalten in: |
BMC oral health - 24(2024), 1 vom: 20. März, Seite 358 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Ghaleb, Labib [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
11130-73-7 |
|---|
| Anmerkungen: |
Date Completed 22.03.2024 Date Revised 23.03.2024 published: Electronic Citation Status MEDLINE |
|---|
| doi: |
10.1186/s12903-024-04138-4 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM369991168 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM369991168 | ||
| 003 | DE-627 | ||
| 005 | 20240323235550.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 240322s2024 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1186/s12903-024-04138-4 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1342.xml |
| 035 | |a (DE-627)NLM369991168 | ||
| 035 | |a (NLM)38509532 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Ghaleb, Labib |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Evaluation of enamel surface integrity after orthodontic bracket debonding |b comparison of three different system |
| 264 | 1 | |c 2024 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Completed 22.03.2024 | ||
| 500 | |a Date Revised 23.03.2024 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status MEDLINE | ||
| 520 | |a © 2024. The Author(s). | ||
| 520 | |a OBJECTIVE: This study aimed to evaluate enamel surface integrity and time consumed during residual cement removal after bracket debonding using different adhesive removal burs with and without a dental loupe | ||
| 520 | |a MATERIAL AND METHODS: Sixty human-extracted premolars were collected, cleaned, mounted, and prepared for orthodontic bracket bonding. Teeth were randomly divided into three main groups (n = 20) based on the adhesive removal method: tungsten carbide system (TC), sof-lex discs system (SD), and diamond system (DB) groups. Then, each group was subdivided into two subgroups (naked eye and magnifying loupe subgroups). The brackets were bonded and then debonded after 24 h, and the Adhesive Remnant Index (ARI) was assessed. The adhesive remnants were removed by different systems, and the final polishing was performed by Silicone OneGloss. The enamel surface roughness was evaluated before bracketing (T0), after residual cement removal (T1), and finally after polishing (T2) using surface Mitutoyo SJ-210 profilometry and Scanning Electron Microscopy (SEM) to determine the Enamel Damage Index (EDI) score. The time consumed for adhesive removal was recorded in seconds | ||
| 520 | |a RESULTS: The Kruskal Wallis test showed a statistically significant difference in roughness values at T1 compared to T2 between subgroups (p < 0.001). When comparing EDI at T1 and T2, the Kruskal-Wallis H-test showed statistically significant differences in all subgroups. The pairwise comparisons revealed that EDI scores showed a statistically significant difference at T1 and T2 between DB vs. TC and SD (p = 0.015) but not between TC vs. SD (p = 1.000), indicating the highest roughness value observed in the DB group. The time for cement removal was significantly shorter in the magnifying loupe group than in the naked eye group and was shortest with the TC group, whereas the time was the longest with the DB group (p < 0.05) | ||
| 520 | |a CONCLUSION: All three systems were clinically satisfactory for residual orthodontic adhesive removal. However, TC system produced the lowest enamel roughness, while the DB system created the greatest. The polishing step created smoother surfaces regardless of the systems used for resin removal | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a Randomized Controlled Trial | |
| 650 | 4 | |a Brackets | |
| 650 | 4 | |a Debonding | |
| 650 | 4 | |a Magnifying loupe | |
| 650 | 4 | |a Orthodontic adhesive | |
| 650 | 4 | |a Surface roughness | |
| 650 | 7 | |a Dental Cements |2 NLM | |
| 650 | 7 | |a Glass Ionomer Cements |2 NLM | |
| 650 | 7 | |a tungsten carbide |2 NLM | |
| 650 | 7 | |a 11130-73-7 |2 NLM | |
| 650 | 7 | |a Tungsten Compounds |2 NLM | |
| 700 | 1 | |a Al-Worafi, Naseem Ali |e verfasserin |4 aut | |
| 700 | 1 | |a Thawaba, Ahmed |e verfasserin |4 aut | |
| 700 | 1 | |a Abdulqader, Abbas Ahmed |e verfasserin |4 aut | |
| 700 | 1 | |a Alkamel, Aqlan |e verfasserin |4 aut | |
| 700 | 1 | |a Abdo, Yaser |e verfasserin |4 aut | |
| 700 | 1 | |a Yang, Zhao |e verfasserin |4 aut | |
| 700 | 1 | |a Noman, Nashwan |e verfasserin |4 aut | |
| 700 | 1 | |a Al-Aroomi, Maged Ali |e verfasserin |4 aut | |
| 700 | 1 | |a Yulou, Tian |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t BMC oral health |d 2001 |g 24(2024), 1 vom: 20. März, Seite 358 |w (DE-627)NLM116714018 |x 1472-6831 |7 nnns |
| 773 | 1 | 8 | |g volume:24 |g year:2024 |g number:1 |g day:20 |g month:03 |g pages:358 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.1186/s12903-024-04138-4 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 24 |j 2024 |e 1 |b 20 |c 03 |h 358 | ||