Cooling dynamics of droplets exposed to solid surface freezing and vitrification
Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved..
Solid surface freezing or vitrification (SSF/SSV) can be done by depositing droplets of a sample, e.g., cells in a preservation solution, onto a pre-cooled metal surface. It is used to achieve higher cooling rates and concomitant higher cryosurvival rates compared to immersion of samples into liquid nitrogen. In this study, numerical simulations of SSF/SSV were conducted by modeling the cooling dynamics of droplets of cryoprotective agent (CPA) solutions. It was assumed that deposited droplets attain a cylindrical bottom part and half-ellipsoidal shaped upper part. Material properties for heat transfer simulations including density, heat capacity and thermal conductivity were obtained from the literature and extrapolated using polynomial fitting. The impact of CPA type, i.e., glycerol (GLY) and dimethyl sulfoxide (DMSO), CPA concentration, and droplet size on the cooling dynamics was simulated at different CPA mass fractions at temperatures ranging from -196 to 25 °C. Simulations show that glycerol solutions cool faster compared to DMSO solutions, and cooling rates increase with decreasing CPA concentration. However, we note that material property data for GLY and DMSO solutions were obtained in different temperature and concentration ranges under different conditions, which complicated making an accurate comparison. Experimental studies show that samples that freeze have a delayed cooling response early on, whereas equilibration times are similar compared to samples that vitrify. Finally, as proof of concept, droplets of human red blood cells (RBCs) were cryopreserved using SSV/SSF comparing the effect of GLY and DMSO on cryopreservation outcome. At 20% (w/w), similar hemolysis rates were found for GLY and DMSO, whereas at 40%, GLY outperformed DMSO.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2024 |
|---|---|
| Erschienen: |
2024 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:115 |
|---|---|
| Enthalten in: |
Cryobiology - 115(2024) vom: 04. März, Seite 104879 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Liu, Dejia [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Cryopreservation |
|---|
| Anmerkungen: |
Date Revised 12.03.2024 published: Print-Electronic Citation Status Publisher |
|---|
| doi: |
10.1016/j.cryobiol.2024.104879 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM369374657 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM369374657 | ||
| 003 | DE-627 | ||
| 005 | 20240313234625.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 240307s2024 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1016/j.cryobiol.2024.104879 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1326.xml |
| 035 | |a (DE-627)NLM369374657 | ||
| 035 | |a (NLM)38447705 | ||
| 035 | |a (PII)S0011-2240(24)00034-8 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Liu, Dejia |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Cooling dynamics of droplets exposed to solid surface freezing and vitrification |
| 264 | 1 | |c 2024 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 12.03.2024 | ||
| 500 | |a published: Print-Electronic | ||
| 500 | |a Citation Status Publisher | ||
| 520 | |a Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved. | ||
| 520 | |a Solid surface freezing or vitrification (SSF/SSV) can be done by depositing droplets of a sample, e.g., cells in a preservation solution, onto a pre-cooled metal surface. It is used to achieve higher cooling rates and concomitant higher cryosurvival rates compared to immersion of samples into liquid nitrogen. In this study, numerical simulations of SSF/SSV were conducted by modeling the cooling dynamics of droplets of cryoprotective agent (CPA) solutions. It was assumed that deposited droplets attain a cylindrical bottom part and half-ellipsoidal shaped upper part. Material properties for heat transfer simulations including density, heat capacity and thermal conductivity were obtained from the literature and extrapolated using polynomial fitting. The impact of CPA type, i.e., glycerol (GLY) and dimethyl sulfoxide (DMSO), CPA concentration, and droplet size on the cooling dynamics was simulated at different CPA mass fractions at temperatures ranging from -196 to 25 °C. Simulations show that glycerol solutions cool faster compared to DMSO solutions, and cooling rates increase with decreasing CPA concentration. However, we note that material property data for GLY and DMSO solutions were obtained in different temperature and concentration ranges under different conditions, which complicated making an accurate comparison. Experimental studies show that samples that freeze have a delayed cooling response early on, whereas equilibration times are similar compared to samples that vitrify. Finally, as proof of concept, droplets of human red blood cells (RBCs) were cryopreserved using SSV/SSF comparing the effect of GLY and DMSO on cryopreservation outcome. At 20% (w/w), similar hemolysis rates were found for GLY and DMSO, whereas at 40%, GLY outperformed DMSO | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a Cryopreservation | |
| 650 | 4 | |a Droplet generation | |
| 650 | 4 | |a Numerical simulation | |
| 650 | 4 | |a Red blood cells | |
| 650 | 4 | |a Solid surface vitrification/freezing | |
| 650 | 4 | |a Vitrification | |
| 700 | 1 | |a Oldenhof, Harriëtte |e verfasserin |4 aut | |
| 700 | 1 | |a Luo, Xing |e verfasserin |4 aut | |
| 700 | 1 | |a Braun, Tobias |e verfasserin |4 aut | |
| 700 | 1 | |a Sieme, Harald |e verfasserin |4 aut | |
| 700 | 1 | |a Wolkers, Willem F |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Cryobiology |d 1964 |g 115(2024) vom: 04. März, Seite 104879 |w (DE-627)NLM000068845 |x 1090-2392 |7 nnns |
| 773 | 1 | 8 | |g volume:115 |g year:2024 |g day:04 |g month:03 |g pages:104879 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.1016/j.cryobiol.2024.104879 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 115 |j 2024 |b 04 |c 03 |h 104879 | ||