Advanced Analysis of the Properties of Solid-Wire Electric Contacts Produced by Ultrasonic Welding and Soldering
The current article presents an advanced analysis of the properties of solid-wire electric contacts produced with ultrasonic welding and soldering. Soldering is generally used to join thin, solid copper wires to produce electrical contacts in small-volume production, as ultrasonic welding does not provide acceptable peel force and tensile strength due to the deformation and thinning of the wires. In this article, ultrasonic welding of thin, solid copper wires using a ring before and after a thermal shock test is discussed and compared with the standard soldering technique. The thermal shock test was carried out in the temperature range from -30 to 150 °C. Half of the samples, for both the joining techniques and the wires, were subjected to the thermal shock test; the other half were not. Investigations included electrical resistance tests, optical and SEM microscopy, XRD, microhardness measurements, peel tests, tensile tests, and fractographic analysis. The electrical resistance test, microscopy, microhardness measurements, and fracture examinations showed no differences between the thermal shock-exposed and the non-exposed samples with the same joining process. In mechanical tests, the ultrasonic joint demonstrated superior strength compared to the soldered joint.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2024 |
|---|---|
| Erschienen: |
2024 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:17 |
|---|---|
| Enthalten in: |
Materials (Basel, Switzerland) - 17(2024), 2 vom: 09. Jan. |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Logar, Andraž [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Electrical conductivity |
|---|
| Anmerkungen: |
Date Revised 28.01.2024 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/ma17020334 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM367459914 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM367459914 | ||
| 003 | DE-627 | ||
| 005 | 20240128232024.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 240123s2024 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/ma17020334 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1273.xml |
| 035 | |a (DE-627)NLM367459914 | ||
| 035 | |a (NLM)38255501 | ||
| 035 | |a (PII)334 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Logar, Andraž |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Advanced Analysis of the Properties of Solid-Wire Electric Contacts Produced by Ultrasonic Welding and Soldering |
| 264 | 1 | |c 2024 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 28.01.2024 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a The current article presents an advanced analysis of the properties of solid-wire electric contacts produced with ultrasonic welding and soldering. Soldering is generally used to join thin, solid copper wires to produce electrical contacts in small-volume production, as ultrasonic welding does not provide acceptable peel force and tensile strength due to the deformation and thinning of the wires. In this article, ultrasonic welding of thin, solid copper wires using a ring before and after a thermal shock test is discussed and compared with the standard soldering technique. The thermal shock test was carried out in the temperature range from -30 to 150 °C. Half of the samples, for both the joining techniques and the wires, were subjected to the thermal shock test; the other half were not. Investigations included electrical resistance tests, optical and SEM microscopy, XRD, microhardness measurements, peel tests, tensile tests, and fractographic analysis. The electrical resistance test, microscopy, microhardness measurements, and fracture examinations showed no differences between the thermal shock-exposed and the non-exposed samples with the same joining process. In mechanical tests, the ultrasonic joint demonstrated superior strength compared to the soldered joint | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a electrical conductivity | |
| 650 | 4 | |a joint strength | |
| 650 | 4 | |a soldering | |
| 650 | 4 | |a solid copper wires | |
| 650 | 4 | |a thermal shock test | |
| 650 | 4 | |a ultrasonic welding | |
| 700 | 1 | |a Klobčar, Damjan |e verfasserin |4 aut | |
| 700 | 1 | |a Nagode, Aleš |e verfasserin |4 aut | |
| 700 | 1 | |a Trdan, Uroš |e verfasserin |4 aut | |
| 700 | 1 | |a Černivec, Gregor |e verfasserin |4 aut | |
| 700 | 1 | |a Sharma, Abhay |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Materials (Basel, Switzerland) |d 2009 |g 17(2024), 2 vom: 09. Jan. |w (DE-627)NLM208535349 |x 1996-1944 |7 nnns |
| 773 | 1 | 8 | |g volume:17 |g year:2024 |g number:2 |g day:09 |g month:01 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/ma17020334 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 17 |j 2024 |e 2 |b 09 |c 01 | ||