High-Precision Ultra-Long Air Slit Fabrication Based on MEMS Technology for Imaging Spectrometers
The increasing demand for accurate imaging spectral information in remote sensing detection has driven the development of hyperspectral remote sensing instruments towards a larger view field and higher resolution. As the core component of the spectrometer slit, the designed length reaches tens of millimeters while the precision maintained within the μm level. Such precision requirements pose challenges to traditional machining and laser processing. In this paper, a high-precision air slit was created with a large aspect ratio through MEMS technology on SOI silicon wafers. In particular, a MEMS slit was prepared with a width of 15 μm and an aspect ratio exceeding 4000:1, and a spectral spectroscopy system was created and tested with a Hg-Cd light source. As a result, the spectral spectrum was linear within the visible range, and a spectral resolution of less than 1 nm was obtained. The standard deviation of resolution is only one-fourth of that is seen in machined slits across various view fields. This research provided a reliable and novel manufacturing technique for high-precision air slits, offering technical assistance in developing high-resolution wide-coverage imaging spectrometers.
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2023 |
---|---|
Erschienen: |
2023 |
Enthalten in: |
Zur Gesamtaufnahme - volume:14 |
---|---|
Enthalten in: |
Micromachines - 14(2023), 12 vom: 30. Nov. |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Ren, Xiaoyu [VerfasserIn] |
---|
Links: |
---|
Themen: |
---|
Anmerkungen: |
Date Revised 25.12.2023 published: Electronic Citation Status PubMed-not-MEDLINE |
---|
doi: |
10.3390/mi14122198 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
NLM366290320 |
---|
LEADER | 01000naa a22002652 4500 | ||
---|---|---|---|
001 | NLM366290320 | ||
003 | DE-627 | ||
005 | 20231227141122.0 | ||
007 | cr uuu---uuuuu | ||
008 | 231227s2023 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.3390/mi14122198 |2 doi | |
028 | 5 | 2 | |a pubmed24n1238.xml |
035 | |a (DE-627)NLM366290320 | ||
035 | |a (NLM)38138367 | ||
035 | |a (PII)2198 | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
100 | 1 | |a Ren, Xiaoyu |e verfasserin |4 aut | |
245 | 1 | 0 | |a High-Precision Ultra-Long Air Slit Fabrication Based on MEMS Technology for Imaging Spectrometers |
264 | 1 | |c 2023 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ƒaComputermedien |b c |2 rdamedia | ||
338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
500 | |a Date Revised 25.12.2023 | ||
500 | |a published: Electronic | ||
500 | |a Citation Status PubMed-not-MEDLINE | ||
520 | |a The increasing demand for accurate imaging spectral information in remote sensing detection has driven the development of hyperspectral remote sensing instruments towards a larger view field and higher resolution. As the core component of the spectrometer slit, the designed length reaches tens of millimeters while the precision maintained within the μm level. Such precision requirements pose challenges to traditional machining and laser processing. In this paper, a high-precision air slit was created with a large aspect ratio through MEMS technology on SOI silicon wafers. In particular, a MEMS slit was prepared with a width of 15 μm and an aspect ratio exceeding 4000:1, and a spectral spectroscopy system was created and tested with a Hg-Cd light source. As a result, the spectral spectrum was linear within the visible range, and a spectral resolution of less than 1 nm was obtained. The standard deviation of resolution is only one-fourth of that is seen in machined slits across various view fields. This research provided a reliable and novel manufacturing technique for high-precision air slits, offering technical assistance in developing high-resolution wide-coverage imaging spectrometers | ||
650 | 4 | |a Journal Article | |
650 | 4 | |a DRIE | |
650 | 4 | |a MEMS | |
650 | 4 | |a air slit | |
650 | 4 | |a spectrometer | |
700 | 1 | |a Yao, Selina X |e verfasserin |4 aut | |
700 | 1 | |a Zhu, Jiacheng |e verfasserin |4 aut | |
700 | 1 | |a Deng, Zejun |e verfasserin |4 aut | |
700 | 1 | |a Wang, Yijia |e verfasserin |4 aut | |
700 | 1 | |a Zhang, Baoshun |e verfasserin |4 aut | |
700 | 1 | |a Zeng, Zhongming |e verfasserin |4 aut | |
700 | 1 | |a Zhai, Hao |e verfasserin |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Micromachines |d 2013 |g 14(2023), 12 vom: 30. Nov. |w (DE-627)NLM243194161 |x 2072-666X |7 nnns |
773 | 1 | 8 | |g volume:14 |g year:2023 |g number:12 |g day:30 |g month:11 |
856 | 4 | 0 | |u http://dx.doi.org/10.3390/mi14122198 |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a GBV_NLM | ||
951 | |a AR | ||
952 | |d 14 |j 2023 |e 12 |b 30 |c 11 |