Effect of filler contents on the bond strength of CAD/CAM resin crowns : New resin primer versus conventional silane agents
Purpose This study aims to evaluate the effects of resin primers containing methyl methacrylate (MMA) and silane agent on the bonding effectiveness of indirect resin composite blocks with three different filler contents.Methods A commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite block and two experimental resin composite blocks with different filler contents were alumina-blasted and two surface treatments (primer and silane agent) were applied. The resin cement was built up, and the micro-tensile bond strength (μTBS) was measured after 24 hours, 1 month or 3 months of water storage (n = 24 per group). The fracture surfaces after μTBS measurements and resin block/cement interface were observed by scanning electron microscopy (SEM).Results The primer treatment group showed a significantly higher bond strength than the silane group only in F0 (filler content 0 wt%) group (P < 0.001). In the primer group, F0 and F41 (filler content 41 wt%) groups showed significantly higher bond strengths than F82 (filler content 82 wt%) group (P < 0.001). In contrast, in the silane group, F41 group showed significantly higher bond strength than F0 and F82 groups (P < 0.001), and F82 group showed significantly higher bond strength than F0 group (P < 0.001). SEM revealed that the matrix resin was partially destroyed on the fracture surface of the primer group, and an uneven interface surface was observed compared with that of the silane group.Conclusions MMA-containing primers showed higher bonding effectiveness to CAD/CAM resin composite blocks than the silane treatment.
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2024 |
---|---|
Erschienen: |
2024 |
Enthalten in: |
Zur Gesamtaufnahme - volume:68 |
---|---|
Enthalten in: |
Journal of prosthodontic research - 68(2024), 2 vom: 08. Apr., Seite 283-289 |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Hagino, Ryosuke [VerfasserIn] |
---|
Links: |
---|
Themen: |
Adhesive dentistry |
---|
Anmerkungen: |
Date Completed 09.04.2024 Date Revised 09.04.2024 published: Print-Electronic Citation Status MEDLINE |
---|
doi: |
10.2186/jpr.JPR_D_22_00301 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
NLM357883454 |
---|
LEADER | 01000caa a22002652 4500 | ||
---|---|---|---|
001 | NLM357883454 | ||
003 | DE-627 | ||
005 | 20240409232122.0 | ||
007 | cr uuu---uuuuu | ||
008 | 231226s2024 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.2186/jpr.JPR_D_22_00301 |2 doi | |
028 | 5 | 2 | |a pubmed24n1370.xml |
035 | |a (DE-627)NLM357883454 | ||
035 | |a (NLM)37286502 | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
100 | 1 | |a Hagino, Ryosuke |e verfasserin |4 aut | |
245 | 1 | 0 | |a Effect of filler contents on the bond strength of CAD/CAM resin crowns |b New resin primer versus conventional silane agents |
264 | 1 | |c 2024 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ƒaComputermedien |b c |2 rdamedia | ||
338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
500 | |a Date Completed 09.04.2024 | ||
500 | |a Date Revised 09.04.2024 | ||
500 | |a published: Print-Electronic | ||
500 | |a Citation Status MEDLINE | ||
520 | |a Purpose This study aims to evaluate the effects of resin primers containing methyl methacrylate (MMA) and silane agent on the bonding effectiveness of indirect resin composite blocks with three different filler contents.Methods A commercially available computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite block and two experimental resin composite blocks with different filler contents were alumina-blasted and two surface treatments (primer and silane agent) were applied. The resin cement was built up, and the micro-tensile bond strength (μTBS) was measured after 24 hours, 1 month or 3 months of water storage (n = 24 per group). The fracture surfaces after μTBS measurements and resin block/cement interface were observed by scanning electron microscopy (SEM).Results The primer treatment group showed a significantly higher bond strength than the silane group only in F0 (filler content 0 wt%) group (P < 0.001). In the primer group, F0 and F41 (filler content 41 wt%) groups showed significantly higher bond strengths than F82 (filler content 82 wt%) group (P < 0.001). In contrast, in the silane group, F41 group showed significantly higher bond strength than F0 and F82 groups (P < 0.001), and F82 group showed significantly higher bond strength than F0 group (P < 0.001). SEM revealed that the matrix resin was partially destroyed on the fracture surface of the primer group, and an uneven interface surface was observed compared with that of the silane group.Conclusions MMA-containing primers showed higher bonding effectiveness to CAD/CAM resin composite blocks than the silane treatment | ||
650 | 4 | |a Journal Article | |
650 | 4 | |a Adhesive dentistry | |
650 | 4 | |a Longevity | |
650 | 4 | |a Micro-tensile bond strength | |
650 | 4 | |a Scanning electron microscopy | |
650 | 4 | |a Transmission electron microscopy | |
650 | 7 | |a Silanes |2 NLM | |
650 | 7 | |a Resin Cements |2 NLM | |
650 | 7 | |a Composite Resins |2 NLM | |
700 | 1 | |a Mine, Atsushi |e verfasserin |4 aut | |
700 | 1 | |a Aoki-Matsumoto, Mariko |e verfasserin |4 aut | |
700 | 1 | |a Miura, Jiro |e verfasserin |4 aut | |
700 | 1 | |a Yumitate, Masahiro |e verfasserin |4 aut | |
700 | 1 | |a Ban, Shintaro |e verfasserin |4 aut | |
700 | 1 | |a Ishida, Masaya |e verfasserin |4 aut | |
700 | 1 | |a Takaishi, Munechika |e verfasserin |4 aut | |
700 | 1 | |a Van Meerbeek, Bart |e verfasserin |4 aut | |
700 | 1 | |a Yatani, Hirofumi |e verfasserin |4 aut | |
700 | 1 | |a Ishigaki, Shoichi |e verfasserin |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Journal of prosthodontic research |d 2009 |g 68(2024), 2 vom: 08. Apr., Seite 283-289 |w (DE-627)NLM187382581 |x 2212-4632 |7 nnns |
773 | 1 | 8 | |g volume:68 |g year:2024 |g number:2 |g day:08 |g month:04 |g pages:283-289 |
856 | 4 | 0 | |u http://dx.doi.org/10.2186/jpr.JPR_D_22_00301 |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a GBV_NLM | ||
951 | |a AR | ||
952 | |d 68 |j 2024 |e 2 |b 08 |c 04 |h 283-289 |