Shade match comparison of CAD-CAM single crowns to a lithium disilicate crown
© 2023 by the American College of Prosthodontists..
PURPOSE: To assess the shade match ability of four varieties of all-ceramic crowns to a neighboring bilayered lithium disilicate crown.
MATERIAL AND METHODS: A dentiform was used to fabricate a bilayered lithium disilicate crown on the maxillary right central incisor, following the anatomy and shade of a selected natural tooth. Two crowns (one full-contour, one cutback) were then designed on a prepared maxillary left central incisor, following the contour of the neighboring crown. The designed crowns were used to manufacture monolithic lithium disilicate, bilayered lithium disilicate, bilayered zirconia, and monolithic zirconia crowns, 10 each. An intraoral scanner and a spectrophotometer were used to assess the frequency of matched shades and to calculate the color difference (ΔE) between the two central incisors at the incisal, middle, and cervical thirds. Kruskal-Wallis and two-way ANOVA were used to compare the frequency of matched shades and ΔE values, respectively (α = 0.05).
RESULTS: There was no significant (p > 0.05) difference in frequencies of matched shades for each group at the three sites; except bilayered lithium disilicate crowns. Bilayered lithium disilicate crowns had significantly (p < 0.05) higher match frequency than monolithic zirconia at the middle third. The ΔE value was not significantly (p > 0.05) different among the groups at the cervical third. However, monolithic zirconia had significantly (p < 0.05) higher ΔE values than bilayered lithium disilicate and zirconia at the incisal and middle thirds.
CONCLUSIONS: Bilayered lithium disilicate and zirconia appeared to most closely match the shade of an existing bilayered lithium disilicate crown.
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2024 |
---|---|
Erschienen: |
2024 |
Enthalten in: |
Zur Gesamtaufnahme - volume:33 |
---|---|
Enthalten in: |
Journal of prosthodontics : official journal of the American College of Prosthodontists - 33(2024), 3 vom: 10. März, Seite 246-251 |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Li, Rui [VerfasserIn] |
---|
Links: |
---|
Themen: |
12001-21-7 |
---|
Anmerkungen: |
Date Completed 13.03.2024 Date Revised 13.03.2024 published: Print-Electronic Citation Status MEDLINE |
---|
doi: |
10.1111/jopr.13676 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
NLM353886874 |
---|
LEADER | 01000caa a22002652 4500 | ||
---|---|---|---|
001 | NLM353886874 | ||
003 | DE-627 | ||
005 | 20240313233340.0 | ||
007 | cr uuu---uuuuu | ||
008 | 231226s2024 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.1111/jopr.13676 |2 doi | |
028 | 5 | 2 | |a pubmed24n1326.xml |
035 | |a (DE-627)NLM353886874 | ||
035 | |a (NLM)36882921 | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
100 | 1 | |a Li, Rui |e verfasserin |4 aut | |
245 | 1 | 0 | |a Shade match comparison of CAD-CAM single crowns to a lithium disilicate crown |
264 | 1 | |c 2024 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ƒaComputermedien |b c |2 rdamedia | ||
338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
500 | |a Date Completed 13.03.2024 | ||
500 | |a Date Revised 13.03.2024 | ||
500 | |a published: Print-Electronic | ||
500 | |a Citation Status MEDLINE | ||
520 | |a © 2023 by the American College of Prosthodontists. | ||
520 | |a PURPOSE: To assess the shade match ability of four varieties of all-ceramic crowns to a neighboring bilayered lithium disilicate crown | ||
520 | |a MATERIAL AND METHODS: A dentiform was used to fabricate a bilayered lithium disilicate crown on the maxillary right central incisor, following the anatomy and shade of a selected natural tooth. Two crowns (one full-contour, one cutback) were then designed on a prepared maxillary left central incisor, following the contour of the neighboring crown. The designed crowns were used to manufacture monolithic lithium disilicate, bilayered lithium disilicate, bilayered zirconia, and monolithic zirconia crowns, 10 each. An intraoral scanner and a spectrophotometer were used to assess the frequency of matched shades and to calculate the color difference (ΔE) between the two central incisors at the incisal, middle, and cervical thirds. Kruskal-Wallis and two-way ANOVA were used to compare the frequency of matched shades and ΔE values, respectively (α = 0.05) | ||
520 | |a RESULTS: There was no significant (p > 0.05) difference in frequencies of matched shades for each group at the three sites; except bilayered lithium disilicate crowns. Bilayered lithium disilicate crowns had significantly (p < 0.05) higher match frequency than monolithic zirconia at the middle third. The ΔE value was not significantly (p > 0.05) different among the groups at the cervical third. However, monolithic zirconia had significantly (p < 0.05) higher ΔE values than bilayered lithium disilicate and zirconia at the incisal and middle thirds | ||
520 | |a CONCLUSIONS: Bilayered lithium disilicate and zirconia appeared to most closely match the shade of an existing bilayered lithium disilicate crown | ||
650 | 4 | |a Journal Article | |
650 | 4 | |a all-ceramic crown | |
650 | 4 | |a shade assessment | |
650 | 4 | |a shade match | |
650 | 4 | |a spectrophotometer | |
650 | 7 | |a lithia disilicate |2 NLM | |
650 | 7 | |a zirconium oxide |2 NLM | |
650 | 7 | |a S38N85C5G0 |2 NLM | |
650 | 7 | |a Dental Porcelain |2 NLM | |
650 | 7 | |a 12001-21-7 |2 NLM | |
650 | 7 | |a Zirconium |2 NLM | |
650 | 7 | |a C6V6S92N3C |2 NLM | |
700 | 1 | |a Lin, Yu-Chun |e verfasserin |4 aut | |
700 | 1 | |a Sadid-Zadeh, Ramtin |e verfasserin |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Journal of prosthodontics : official journal of the American College of Prosthodontists |d 1996 |g 33(2024), 3 vom: 10. März, Seite 246-251 |w (DE-627)NLM012891819 |x 1532-849X |7 nnns |
773 | 1 | 8 | |g volume:33 |g year:2024 |g number:3 |g day:10 |g month:03 |g pages:246-251 |
856 | 4 | 0 | |u http://dx.doi.org/10.1111/jopr.13676 |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a GBV_NLM | ||
951 | |a AR | ||
952 | |d 33 |j 2024 |e 3 |b 10 |c 03 |h 246-251 |