Rheological, Aging, and Microstructural Properties of Polycarbonate and Polytetrafluoroethylene Modified Bitumen
Deterioration of asphalt pavements due to massive load of vehicles and climatic variation has demanded the use of pavements construction material with an excellent resilience characteristic, resistance to permanent deformation, and most importantly, a much longer service lifespan. The main structural distresses in pavement construction are permanent deformation at high temperatures and fatigue cracking under repetitive traffic loadings. To comprehensively investigate the performance of bitumen penetration grade (PG) 70 against rutting, fatigue, and high temperature cracking in hot mix asphalt (HMA) pavements, polycarbonate (PC) and polytetrafluoroethylene (PTFE) were used. The investigation of the internal structure, rheological, and physical properties of base and modified bitumen (MB) mixes with different percentages of modifiers (0%, 2.5%, and 5%) by weight were performed via scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR) analysis, X-ray diffraction (XRD) pattern analysis, rolling thin-film oven test (RTFOT), pressurized aging vessel (PAV), dynamic shear rheometer (DSR), rotational viscosity (RV), and bending beam rheometer (BBR). The results of the RV test indicate that modification of neat bitumen with polycarbonate and polytetrafluoroethylene increased the viscosity for polycarbonate-modified bitumen (PCMB), polytetrafluoroethylene-modified bitumen (PTFEMB), and for a blend of PCMB-PTFEMB by 44%, 50%, and 55.75% at 135 °C and 111.10%, 127.80%, and 138.88% at 165 °C, accordingly. BBR test results revealed that modifiers increased the rigidity of neat bitumen by 74.8%, 75.8%, and 74.5% at -16 °C, -22 °C, and -28 °C, respectively.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2022 |
|---|---|
| Erschienen: |
2022 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:14 |
|---|---|
| Enthalten in: |
Polymers - 14(2022), 16 vom: 12. Aug. |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Ansar, Muhammad [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
BBR |
|---|
| Anmerkungen: |
Date Revised 30.08.2022 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/polym14163283 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM345339339 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM345339339 | ||
| 003 | DE-627 | ||
| 005 | 20231226024838.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231226s2022 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/polym14163283 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1151.xml |
| 035 | |a (DE-627)NLM345339339 | ||
| 035 | |a (NLM)36015539 | ||
| 035 | |a (PII)3283 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Ansar, Muhammad |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Rheological, Aging, and Microstructural Properties of Polycarbonate and Polytetrafluoroethylene Modified Bitumen |
| 264 | 1 | |c 2022 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 30.08.2022 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a Deterioration of asphalt pavements due to massive load of vehicles and climatic variation has demanded the use of pavements construction material with an excellent resilience characteristic, resistance to permanent deformation, and most importantly, a much longer service lifespan. The main structural distresses in pavement construction are permanent deformation at high temperatures and fatigue cracking under repetitive traffic loadings. To comprehensively investigate the performance of bitumen penetration grade (PG) 70 against rutting, fatigue, and high temperature cracking in hot mix asphalt (HMA) pavements, polycarbonate (PC) and polytetrafluoroethylene (PTFE) were used. The investigation of the internal structure, rheological, and physical properties of base and modified bitumen (MB) mixes with different percentages of modifiers (0%, 2.5%, and 5%) by weight were performed via scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR) analysis, X-ray diffraction (XRD) pattern analysis, rolling thin-film oven test (RTFOT), pressurized aging vessel (PAV), dynamic shear rheometer (DSR), rotational viscosity (RV), and bending beam rheometer (BBR). The results of the RV test indicate that modification of neat bitumen with polycarbonate and polytetrafluoroethylene increased the viscosity for polycarbonate-modified bitumen (PCMB), polytetrafluoroethylene-modified bitumen (PTFEMB), and for a blend of PCMB-PTFEMB by 44%, 50%, and 55.75% at 135 °C and 111.10%, 127.80%, and 138.88% at 165 °C, accordingly. BBR test results revealed that modifiers increased the rigidity of neat bitumen by 74.8%, 75.8%, and 74.5% at -16 °C, -22 °C, and -28 °C, respectively | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a BBR | |
| 650 | 4 | |a DSR | |
| 650 | 4 | |a bitumen aging | |
| 650 | 4 | |a rheology | |
| 650 | 4 | |a rotational viscosity | |
| 700 | 1 | |a Sikandar, Muhammad Ali |e verfasserin |4 aut | |
| 700 | 1 | |a Althoey, Fadi |e verfasserin |4 aut | |
| 700 | 1 | |a Tariq, Muhammad Atiq Ur Rehman |e verfasserin |4 aut | |
| 700 | 1 | |a Alyami, Saleh H |e verfasserin |4 aut | |
| 700 | 1 | |a Elsayed Elkhatib, Samah |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Polymers |d 2010 |g 14(2022), 16 vom: 12. Aug. |w (DE-627)NLM205507980 |x 2073-4360 |7 nnns |
| 773 | 1 | 8 | |g volume:14 |g year:2022 |g number:16 |g day:12 |g month:08 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/polym14163283 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 14 |j 2022 |e 16 |b 12 |c 08 | ||