Quantitative Analysis of Adhesion Characteristics between Crumb Rubber Modified Asphalt and Aggregate Using Surface Free Energy Theory
The utilization of waste rubber tires is of great value for environment protection and resource recovery, which can also improve the properties of matrix asphalt. The adhesion characteristics were evaluated for crumb rubber modified asphalt and limestone aggregate using the surface free energy (SFE) approach. Four types of matrix asphalt and four rubber contents were used to prepare the crumb rubber modified asphalt. The contact angle of matrix and crumb rubber modified asphalt was obtained, and the SFE indicators (dispersion, polar component, and compatibility rate-CR) were calculated. Moreover, the water stability tests were conducted using one matrix and rubber modified asphalt in order to investigate the relationship between SFE and water stability indicators. Results showed that the total SFE, dispersion component, adhesion work, and CR increased with the addition of crumb rubber, while the polar component and spalling work decreased. The types of asphalt had different influences on SFE indicators. The results from analysis of variation (ANOVA) indicated asphalt type and rubber content had significant influence on the adhesion work, spalling work and CR, and the influence of asphalt type was greater than that of rubber content. Additionally, the retained Marshall Stability and tensile strength ratio had better correlation with adhesion work and CR, but less with spalling work. The presented results demonstrated that the type of matrix asphalt played an important role in the adhesion characteristics for the crumb rubber modified asphalt.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2022 |
|---|---|
| Erschienen: |
2022 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:15 |
|---|---|
| Enthalten in: |
Materials (Basel, Switzerland) - 15(2022), 16 vom: 19. Aug. |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Li, Ning [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Adhesion characteristics |
|---|
| Anmerkungen: |
Date Revised 30.08.2022 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/ma15165735 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM345322665 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM345322665 | ||
| 003 | DE-627 | ||
| 005 | 20231226024816.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231226s2022 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/ma15165735 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1151.xml |
| 035 | |a (DE-627)NLM345322665 | ||
| 035 | |a (NLM)36013872 | ||
| 035 | |a (PII)5735 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Li, Ning |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Quantitative Analysis of Adhesion Characteristics between Crumb Rubber Modified Asphalt and Aggregate Using Surface Free Energy Theory |
| 264 | 1 | |c 2022 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 30.08.2022 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a The utilization of waste rubber tires is of great value for environment protection and resource recovery, which can also improve the properties of matrix asphalt. The adhesion characteristics were evaluated for crumb rubber modified asphalt and limestone aggregate using the surface free energy (SFE) approach. Four types of matrix asphalt and four rubber contents were used to prepare the crumb rubber modified asphalt. The contact angle of matrix and crumb rubber modified asphalt was obtained, and the SFE indicators (dispersion, polar component, and compatibility rate-CR) were calculated. Moreover, the water stability tests were conducted using one matrix and rubber modified asphalt in order to investigate the relationship between SFE and water stability indicators. Results showed that the total SFE, dispersion component, adhesion work, and CR increased with the addition of crumb rubber, while the polar component and spalling work decreased. The types of asphalt had different influences on SFE indicators. The results from analysis of variation (ANOVA) indicated asphalt type and rubber content had significant influence on the adhesion work, spalling work and CR, and the influence of asphalt type was greater than that of rubber content. Additionally, the retained Marshall Stability and tensile strength ratio had better correlation with adhesion work and CR, but less with spalling work. The presented results demonstrated that the type of matrix asphalt played an important role in the adhesion characteristics for the crumb rubber modified asphalt | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a adhesion characteristics | |
| 650 | 4 | |a adhesion work | |
| 650 | 4 | |a crumb rubber modified asphalt | |
| 650 | 4 | |a spalling work | |
| 650 | 4 | |a surface free energy | |
| 650 | 4 | |a water stability | |
| 700 | 1 | |a Wang, Jie |e verfasserin |4 aut | |
| 700 | 1 | |a Si, Wei |e verfasserin |4 aut | |
| 700 | 1 | |a Hu, Dongxia |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Materials (Basel, Switzerland) |d 2009 |g 15(2022), 16 vom: 19. Aug. |w (DE-627)NLM208535349 |x 1996-1944 |7 nnns |
| 773 | 1 | 8 | |g volume:15 |g year:2022 |g number:16 |g day:19 |g month:08 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/ma15165735 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 15 |j 2022 |e 16 |b 19 |c 08 | ||