Deformation Characteristics and Constitutive Equations for the Semi-Solid Isothermal Compression of Cold Radial Forged 6063 Aluminium Alloy
Al-Mg-Si based alloys are popular alloys used in the automotive industry. However, limited studies have been performed to investigate the microstructure, deformation characteristics, and deformation mechanism for the semi-solid 6063 alloys. In this study, the cold radial forging method and semi-solid isothermal treatment (SSIT) are proposed in the semi-solid isothermal compression (SSIC) process to fabricate high-quality semi-solid 6063 billets. The effects of deformation temperature, strain rate, and strain on the microstructure, deformation characteristics, and deformation mechanism of the SSIC of cold radial forged 6063 alloys were investigated experimentally. Constitutive equations were established based on the measured data in experiments to predict the flow stress. Results show that an average grain size in the range from 59.22 to 73.02 μm and an average shape factor in the range from 071 to 078 can be obtained in the microstructure after the cold radial forged 6063 alloys were treated with SSIT process. Four stages (i.e., sharp increase, decrease, steady state, and slow increase) were observed in the true stress- true strain curve. The correlation coefficient of the constitutive equation was obtained as 0.9796 while the average relative error was 5.01%. The deformation mechanism for SSIC of cold radial forged aluminum alloy 6063 mainly included four modes: The liquid phase flow, grain slide or grain rotation along with the liquid film, slide among solid grains, and the plastic deformation of solid grains.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2021 |
|---|---|
| Erschienen: |
2021 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:14 |
|---|---|
| Enthalten in: |
Materials (Basel, Switzerland) - 14(2021), 1 vom: 03. Jan. |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Wang, Yongfei [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Aluminum alloy |
|---|
| Anmerkungen: |
Date Revised 11.01.2021 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/ma14010194 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM319654389 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM319654389 | ||
| 003 | DE-627 | ||
| 005 | 20231225171918.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2021 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/ma14010194 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1065.xml |
| 035 | |a (DE-627)NLM319654389 | ||
| 035 | |a (NLM)33401619 | ||
| 035 | |a (PII)E194 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Wang, Yongfei |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Deformation Characteristics and Constitutive Equations for the Semi-Solid Isothermal Compression of Cold Radial Forged 6063 Aluminium Alloy |
| 264 | 1 | |c 2021 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 11.01.2021 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a Al-Mg-Si based alloys are popular alloys used in the automotive industry. However, limited studies have been performed to investigate the microstructure, deformation characteristics, and deformation mechanism for the semi-solid 6063 alloys. In this study, the cold radial forging method and semi-solid isothermal treatment (SSIT) are proposed in the semi-solid isothermal compression (SSIC) process to fabricate high-quality semi-solid 6063 billets. The effects of deformation temperature, strain rate, and strain on the microstructure, deformation characteristics, and deformation mechanism of the SSIC of cold radial forged 6063 alloys were investigated experimentally. Constitutive equations were established based on the measured data in experiments to predict the flow stress. Results show that an average grain size in the range from 59.22 to 73.02 μm and an average shape factor in the range from 071 to 078 can be obtained in the microstructure after the cold radial forged 6063 alloys were treated with SSIT process. Four stages (i.e., sharp increase, decrease, steady state, and slow increase) were observed in the true stress- true strain curve. The correlation coefficient of the constitutive equation was obtained as 0.9796 while the average relative error was 5.01%. The deformation mechanism for SSIC of cold radial forged aluminum alloy 6063 mainly included four modes: The liquid phase flow, grain slide or grain rotation along with the liquid film, slide among solid grains, and the plastic deformation of solid grains | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a aluminum alloy | |
| 650 | 4 | |a constitutive equations | |
| 650 | 4 | |a deformation characteristics | |
| 650 | 4 | |a deformation mechanism | |
| 650 | 4 | |a microstructure | |
| 650 | 4 | |a semi-solid isothermal compression | |
| 700 | 1 | |a Zhao, Shengdun |e verfasserin |4 aut | |
| 700 | 1 | |a Guo, Yi |e verfasserin |4 aut | |
| 700 | 1 | |a Liu, Kuanxin |e verfasserin |4 aut | |
| 700 | 1 | |a Zheng, Shunqi |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Materials (Basel, Switzerland) |d 2009 |g 14(2021), 1 vom: 03. Jan. |w (DE-627)NLM208535349 |x 1996-1944 |7 nnns |
| 773 | 1 | 8 | |g volume:14 |g year:2021 |g number:1 |g day:03 |g month:01 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/ma14010194 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 14 |j 2021 |e 1 |b 03 |c 01 | ||