A Modified TurboEdit Cycle-Slip Detection and Correction Method for Dual-Frequency Smartphone GNSS Observation
Recently, some smartphone manufacturers have subsequently released dual-frequency GNSS smartphones. With dual-frequency observations, the positioning performance is expected to be significantly improved. Cycle-slip detection and correction play an important role in high-precision GNSS positioning, such as precise point positioning (PPP) and real-time kinematic (RTK) positioning. The TurboEdit method utilizes Melbourne-Wübbena (MW) and phase ionospheric residual (PIR) combinations to detect cycle-slips, and it is widely used in the data processing applications for geodetic GNSS receivers. The smartphone pseudorange observations are proved to be much noisier than those collected with geodetic GNSS receivers. Due to the poor pseudorange observation, the MW combination would be difficult to detect small cycle-slips. In addition, some specific cycle-slip combinations, where the ratio of cycle-slip values at different carrier frequencies is close to the frequency ratio, are also difficult to be detected by PIR combination. As a consequence, the traditional TurboEdit method may fail to detect specific small cycle-slip combinations. In this contribution, we develop a modified TurboEdit cycle-slip detection and correction method for dual-frequency smartphone GNSS observations. At first, MW and PIR combinations are adopted to detect cycle-slips by comparing these two combinations with moving-window average values. Then, the epoch-differenced wide-lane combinations are used to estimate the changes of smartphone position and clock bias, and the cycle-slip is identified by checking the largest normalized residual whether it exceeds a predefined threshold value. The process of estimation and cycle-slip identification is implemented in an iterative way until there is no over-limit residual or there is no redundant measurement. At last, the cycle-slip values at each frequency are estimated with the epoch-differenced wide-lane and ionosphere-free combinations, and the least-square ambiguity decorrelation adjustment (LAMBDA) method is adopted to further obtain an integer solution. The proposed method has been verified with 1 Hz dual-frequency smartphone GNSS data. The results show that the modified TurboEdit method can effectively detect and correct even for specific small cycle-slip combinations, e.g., (4, 3), which is difficult to be detected with the traditional TurboEdit method.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2020 |
|---|---|
| Erschienen: |
2020 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:20 |
|---|---|
| Enthalten in: |
Sensors (Basel, Switzerland) - 20(2020), 20 vom: 10. Okt. |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Xu, Xiaofei [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Cycle-slip |
|---|
| Anmerkungen: |
Date Revised 03.11.2020 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/s20205756 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM316201650 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM316201650 | ||
| 003 | DE-627 | ||
| 005 | 20231225160554.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2020 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/s20205756 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1053.xml |
| 035 | |a (DE-627)NLM316201650 | ||
| 035 | |a (NLM)33050510 | ||
| 035 | |a (PII)E5756 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Xu, Xiaofei |e verfasserin |4 aut | |
| 245 | 1 | 2 | |a A Modified TurboEdit Cycle-Slip Detection and Correction Method for Dual-Frequency Smartphone GNSS Observation |
| 264 | 1 | |c 2020 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 03.11.2020 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a Recently, some smartphone manufacturers have subsequently released dual-frequency GNSS smartphones. With dual-frequency observations, the positioning performance is expected to be significantly improved. Cycle-slip detection and correction play an important role in high-precision GNSS positioning, such as precise point positioning (PPP) and real-time kinematic (RTK) positioning. The TurboEdit method utilizes Melbourne-Wübbena (MW) and phase ionospheric residual (PIR) combinations to detect cycle-slips, and it is widely used in the data processing applications for geodetic GNSS receivers. The smartphone pseudorange observations are proved to be much noisier than those collected with geodetic GNSS receivers. Due to the poor pseudorange observation, the MW combination would be difficult to detect small cycle-slips. In addition, some specific cycle-slip combinations, where the ratio of cycle-slip values at different carrier frequencies is close to the frequency ratio, are also difficult to be detected by PIR combination. As a consequence, the traditional TurboEdit method may fail to detect specific small cycle-slip combinations. In this contribution, we develop a modified TurboEdit cycle-slip detection and correction method for dual-frequency smartphone GNSS observations. At first, MW and PIR combinations are adopted to detect cycle-slips by comparing these two combinations with moving-window average values. Then, the epoch-differenced wide-lane combinations are used to estimate the changes of smartphone position and clock bias, and the cycle-slip is identified by checking the largest normalized residual whether it exceeds a predefined threshold value. The process of estimation and cycle-slip identification is implemented in an iterative way until there is no over-limit residual or there is no redundant measurement. At last, the cycle-slip values at each frequency are estimated with the epoch-differenced wide-lane and ionosphere-free combinations, and the least-square ambiguity decorrelation adjustment (LAMBDA) method is adopted to further obtain an integer solution. The proposed method has been verified with 1 Hz dual-frequency smartphone GNSS data. The results show that the modified TurboEdit method can effectively detect and correct even for specific small cycle-slip combinations, e.g., (4, 3), which is difficult to be detected with the traditional TurboEdit method | ||
| 650 | 4 | |a Letter | |
| 650 | 4 | |a TurboEdit | |
| 650 | 4 | |a cycle-slip | |
| 650 | 4 | |a epoch-differenced | |
| 650 | 4 | |a smartphone | |
| 650 | 4 | |a wide-lane combination | |
| 700 | 1 | |a Nie, Zhixi |e verfasserin |4 aut | |
| 700 | 1 | |a Wang, Zhenjie |e verfasserin |4 aut | |
| 700 | 1 | |a Zhang, Yuanfan |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Sensors (Basel, Switzerland) |d 2007 |g 20(2020), 20 vom: 10. Okt. |w (DE-627)NLM187985170 |x 1424-8220 |7 nnns |
| 773 | 1 | 8 | |g volume:20 |g year:2020 |g number:20 |g day:10 |g month:10 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/s20205756 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 20 |j 2020 |e 20 |b 10 |c 10 | ||