High efficiency removal of heavy metals using tire-derived activated carbon vs commercial activated carbon : Insights into the adsorption mechanisms
Copyright © 2020 Elsevier Ltd. All rights reserved..
In this study, activated carbon was derived from pulverized waste tires using carbonization and chemical activation techniques. Single and competitive batch adsorption experiments for the removal of three synthetic heavy metal ions (Pb2+, Cu2+ and Zn2+) from an aqueous solution were performed to benchmark the efficiency of the Tire-derived Activated Carbon (TAC) in comparison to that of commercial activated carbon (CAC), which was used as the reference material. The sorbents physicochemical properties with corresponding adsorption mechanisms were evaluated by different experimental techniques. TAC exhibited great potential to adsorb heavy metals, with monolayer adsorption capacities as high as 322.5, 185.2, and 71.9 mg g-1 for Pb2+, Cu2+ and Zn2+, respectively, which were significantly higher than the adsorption capacities exhibited by CAC, which were 42.5, 15.0, and 14.0 mg∙g-1 for Pb2+, Cu2+ and Zn2+, respectively. Competitive adsorption results demonstrated the adsorption ability of sorbents is restricted by presence of other ions, and was decreased compared to the single sorption. Sorption kinetics data, with better fit to the pseudo-second order kinetics model, revealed that TAC had faster sorption rate in comparison to CAC. The adsorption capacities of TAC and CAC were reduced to half of their initial capacities after three successive adsorption-desorption cycles. Zeta potential, FT-IR, and XPS analyses revealed that electrostatic attraction and surface complexation mechanisms, as two metal-adsorbing mechanisms, were more influential for TAC. For CAC, a higher cation exchange capacity (CEC) value indicated that the removal of heavy metals by ion exchange was the predominant mechanism.
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2021 |
---|---|
Erschienen: |
2021 |
Enthalten in: |
Zur Gesamtaufnahme - volume:264 |
---|---|
Enthalten in: |
Chemosphere - 264(2021), Pt 1 vom: 15. Feb., Seite 128455 |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Shahrokhi-Shahraki, Rahim [VerfasserIn] |
---|
Links: |
---|
Themen: |
16291-96-6 |
---|
Anmerkungen: |
Date Completed 22.12.2020 Date Revised 22.12.2020 published: Print-Electronic Citation Status MEDLINE |
---|
doi: |
10.1016/j.chemosphere.2020.128455 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
NLM316022446 |
---|
LEADER | 01000naa a22002652 4500 | ||
---|---|---|---|
001 | NLM316022446 | ||
003 | DE-627 | ||
005 | 20231225160158.0 | ||
007 | cr uuu---uuuuu | ||
008 | 231225s2021 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.1016/j.chemosphere.2020.128455 |2 doi | |
028 | 5 | 2 | |a pubmed24n1053.xml |
035 | |a (DE-627)NLM316022446 | ||
035 | |a (NLM)33032208 | ||
035 | |a (PII)S0045-6535(20)32650-3 | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
100 | 1 | |a Shahrokhi-Shahraki, Rahim |e verfasserin |4 aut | |
245 | 1 | 0 | |a High efficiency removal of heavy metals using tire-derived activated carbon vs commercial activated carbon |b Insights into the adsorption mechanisms |
264 | 1 | |c 2021 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ƒaComputermedien |b c |2 rdamedia | ||
338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
500 | |a Date Completed 22.12.2020 | ||
500 | |a Date Revised 22.12.2020 | ||
500 | |a published: Print-Electronic | ||
500 | |a Citation Status MEDLINE | ||
520 | |a Copyright © 2020 Elsevier Ltd. All rights reserved. | ||
520 | |a In this study, activated carbon was derived from pulverized waste tires using carbonization and chemical activation techniques. Single and competitive batch adsorption experiments for the removal of three synthetic heavy metal ions (Pb2+, Cu2+ and Zn2+) from an aqueous solution were performed to benchmark the efficiency of the Tire-derived Activated Carbon (TAC) in comparison to that of commercial activated carbon (CAC), which was used as the reference material. The sorbents physicochemical properties with corresponding adsorption mechanisms were evaluated by different experimental techniques. TAC exhibited great potential to adsorb heavy metals, with monolayer adsorption capacities as high as 322.5, 185.2, and 71.9 mg g-1 for Pb2+, Cu2+ and Zn2+, respectively, which were significantly higher than the adsorption capacities exhibited by CAC, which were 42.5, 15.0, and 14.0 mg∙g-1 for Pb2+, Cu2+ and Zn2+, respectively. Competitive adsorption results demonstrated the adsorption ability of sorbents is restricted by presence of other ions, and was decreased compared to the single sorption. Sorption kinetics data, with better fit to the pseudo-second order kinetics model, revealed that TAC had faster sorption rate in comparison to CAC. The adsorption capacities of TAC and CAC were reduced to half of their initial capacities after three successive adsorption-desorption cycles. Zeta potential, FT-IR, and XPS analyses revealed that electrostatic attraction and surface complexation mechanisms, as two metal-adsorbing mechanisms, were more influential for TAC. For CAC, a higher cation exchange capacity (CEC) value indicated that the removal of heavy metals by ion exchange was the predominant mechanism | ||
650 | 4 | |a Journal Article | |
650 | 4 | |a Adsorption | |
650 | 4 | |a CAC | |
650 | 4 | |a Desorption | |
650 | 4 | |a Heavy metals | |
650 | 4 | |a TAC | |
650 | 7 | |a Metals, Heavy |2 NLM | |
650 | 7 | |a Water Pollutants, Chemical |2 NLM | |
650 | 7 | |a Charcoal |2 NLM | |
650 | 7 | |a 16291-96-6 |2 NLM | |
700 | 1 | |a Benally, Chelsea |e verfasserin |4 aut | |
700 | 1 | |a El-Din, Mohamed Gamal |e verfasserin |4 aut | |
700 | 1 | |a Park, Junboum |e verfasserin |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Chemosphere |d 1994 |g 264(2021), Pt 1 vom: 15. Feb., Seite 128455 |w (DE-627)NLM074698028 |x 1879-1298 |7 nnns |
773 | 1 | 8 | |g volume:264 |g year:2021 |g number:Pt 1 |g day:15 |g month:02 |g pages:128455 |
856 | 4 | 0 | |u http://dx.doi.org/10.1016/j.chemosphere.2020.128455 |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a GBV_NLM | ||
951 | |a AR | ||
952 | |d 264 |j 2021 |e Pt 1 |b 15 |c 02 |h 128455 |