Nonlinear Hydraulic Pressure Response of an Improved Fiber Tip Interferometric High-Pressure Sensor
We demonstrate a silica diaphragm-based fiber tip Fabry-Perot interferometer (FPI) for high-pressure (40 MPa) sensing. By using a fiber tip polishing technique, the thickness of the silica diaphragm could be precisely controlled and the pressure sensitivity of the fabricated FPI sensor was enhanced significantly by reducing the diaphragm thickness; however, the relationship between the pressure sensitivity and diaphragm thickness is not linear. A high sensitivity of -1.436 nm/MPa and a linearity of 0.99124 in hydraulic pressure range of 0 to 40 MPa were demonstrated for a sensor with a diaphragm thickness of 4.63 μm. The achieved sensitivity was about one order of magnitude higher than the previous results reported on similar fiber tip FPI sensors in the same pressure measurement range. Sensors with a thinner silica diaphragm (i.e., 4.01 and 2.09 μm) rendered further increased hydraulic pressure sensitivity, but yield a significant nonlinear response. Two geometric models and a finite element method (FEM) were carried out to explain the nonlinear response. The simulation results indicated the formation of cambered internal silica surface during the arc discharge process in the fiber tip FPI sensor fabrication.
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2020 |
---|---|
Erschienen: |
2020 |
Enthalten in: |
Zur Gesamtaufnahme - volume:20 |
---|---|
Enthalten in: |
Sensors (Basel, Switzerland) - 20(2020), 9 vom: 30. Apr. |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Huang, Wei [VerfasserIn] |
---|
Links: |
---|
Themen: |
Fabry–Perot interferometer |
---|
Anmerkungen: |
Date Revised 11.06.2020 published: Electronic Citation Status PubMed-not-MEDLINE |
---|
doi: |
10.3390/s20092548 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
NLM309493250 |
---|
LEADER | 01000naa a22002652 4500 | ||
---|---|---|---|
001 | NLM309493250 | ||
003 | DE-627 | ||
005 | 20231225134031.0 | ||
007 | cr uuu---uuuuu | ||
008 | 231225s2020 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.3390/s20092548 |2 doi | |
028 | 5 | 2 | |a pubmed24n1031.xml |
035 | |a (DE-627)NLM309493250 | ||
035 | |a (NLM)32365762 | ||
035 | |a (PII)E2548 | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
100 | 1 | |a Huang, Wei |e verfasserin |4 aut | |
245 | 1 | 0 | |a Nonlinear Hydraulic Pressure Response of an Improved Fiber Tip Interferometric High-Pressure Sensor |
264 | 1 | |c 2020 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ƒaComputermedien |b c |2 rdamedia | ||
338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
500 | |a Date Revised 11.06.2020 | ||
500 | |a published: Electronic | ||
500 | |a Citation Status PubMed-not-MEDLINE | ||
520 | |a We demonstrate a silica diaphragm-based fiber tip Fabry-Perot interferometer (FPI) for high-pressure (40 MPa) sensing. By using a fiber tip polishing technique, the thickness of the silica diaphragm could be precisely controlled and the pressure sensitivity of the fabricated FPI sensor was enhanced significantly by reducing the diaphragm thickness; however, the relationship between the pressure sensitivity and diaphragm thickness is not linear. A high sensitivity of -1.436 nm/MPa and a linearity of 0.99124 in hydraulic pressure range of 0 to 40 MPa were demonstrated for a sensor with a diaphragm thickness of 4.63 μm. The achieved sensitivity was about one order of magnitude higher than the previous results reported on similar fiber tip FPI sensors in the same pressure measurement range. Sensors with a thinner silica diaphragm (i.e., 4.01 and 2.09 μm) rendered further increased hydraulic pressure sensitivity, but yield a significant nonlinear response. Two geometric models and a finite element method (FEM) were carried out to explain the nonlinear response. The simulation results indicated the formation of cambered internal silica surface during the arc discharge process in the fiber tip FPI sensor fabrication | ||
650 | 4 | |a Journal Article | |
650 | 4 | |a Fabry–Perot interferometer | |
650 | 4 | |a hydraulic pressure | |
650 | 4 | |a nonlinear | |
700 | 1 | |a Zhang, Zhe |e verfasserin |4 aut | |
700 | 1 | |a He, Jun |e verfasserin |4 aut | |
700 | 1 | |a Du, Bin |e verfasserin |4 aut | |
700 | 1 | |a Liao, Changrui |e verfasserin |4 aut | |
700 | 1 | |a Liu, Shen |e verfasserin |4 aut | |
700 | 1 | |a Yin, Guolu |e verfasserin |4 aut | |
700 | 1 | |a Wang, Yiping |e verfasserin |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Sensors (Basel, Switzerland) |d 2007 |g 20(2020), 9 vom: 30. Apr. |w (DE-627)NLM187985170 |x 1424-8220 |7 nnns |
773 | 1 | 8 | |g volume:20 |g year:2020 |g number:9 |g day:30 |g month:04 |
856 | 4 | 0 | |u http://dx.doi.org/10.3390/s20092548 |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a GBV_NLM | ||
951 | |a AR | ||
952 | |d 20 |j 2020 |e 9 |b 30 |c 04 |