Optimization of Carbon Nanotube Dispersions in Water Using Response Surface Methodology
The aim of this work was to demonstrate an optimization methodology to reliably obtain stable macrodispersions (i.e., for ≥24 h) of carbon nanotubes in water using sonication. Response surface methodology (RSM) was utilized to assess and optimize the sonication parameters for the process. The studied input parameters were (i) sonication time (duration), (ii) amplitude (of vibration), and (iii) pulse-on/off (duration) of the sonicator. The analyzed responses were mean diameter and size distribution of multiwalled carbon nanotube (MWNT) aggregates in water, which were measured by the dynamic light scattering technique. A semiempirical model was developed and statistically tested to estimate the magnitude of sonicator parameters required to obtain specified MWNT macrodispersions (i.e., aggregates' mean diameter and distribution) in water. The results showed that MWNT aggregates of 2 ± 0.5 μm can be obtained by optimizing sonicator parameters to a sonication time of 89 s, amplitude of 144 μm, and pulse-on/off cycle of 44/30 s. These process settings for 100 mg/L MWNTs in a 30 mL aliquot of deionized water would consume 863 J/mL of sonication energy. Contrary to the popular belief, "sonication time" and/or "sonication energy input" were not found to be proportional to the degree of dispersion of MWNTs in water. This might be the reason for the frequent disparity and nonreproducibility of sonication results reported in scientific literature, especially for dispersing nanomaterials in a number of different systems. The amplitude of vibration was noted to be the most sensitive parameter affecting MWNT aggregates' diameter and distribution in water. The characterization of MWNTs was performed using electron microscopy, surface area analyzer, thermogravimetric analyzer, and zeta potential analyzer. This study can be helpful in evaluating sonication dispersion of particulate matter in other incompressible fluids such as graphene dispersion in organic solvents.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2019 |
|---|---|
| Erschienen: |
2019 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:4 |
|---|---|
| Enthalten in: |
ACS omega - 4(2019), 1 vom: 31. Jan., Seite 849-859 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Zaib, Qammer [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
|---|
| Anmerkungen: |
Date Revised 01.10.2020 published: Electronic-eCollection Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.1021/acsomega.8b02965 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM300688962 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM300688962 | ||
| 003 | DE-627 | ||
| 005 | 20231225103057.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2019 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1021/acsomega.8b02965 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1002.xml |
| 035 | |a (DE-627)NLM300688962 | ||
| 035 | |a (NLM)31459363 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Zaib, Qammer |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Optimization of Carbon Nanotube Dispersions in Water Using Response Surface Methodology |
| 264 | 1 | |c 2019 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 01.10.2020 | ||
| 500 | |a published: Electronic-eCollection | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a The aim of this work was to demonstrate an optimization methodology to reliably obtain stable macrodispersions (i.e., for ≥24 h) of carbon nanotubes in water using sonication. Response surface methodology (RSM) was utilized to assess and optimize the sonication parameters for the process. The studied input parameters were (i) sonication time (duration), (ii) amplitude (of vibration), and (iii) pulse-on/off (duration) of the sonicator. The analyzed responses were mean diameter and size distribution of multiwalled carbon nanotube (MWNT) aggregates in water, which were measured by the dynamic light scattering technique. A semiempirical model was developed and statistically tested to estimate the magnitude of sonicator parameters required to obtain specified MWNT macrodispersions (i.e., aggregates' mean diameter and distribution) in water. The results showed that MWNT aggregates of 2 ± 0.5 μm can be obtained by optimizing sonicator parameters to a sonication time of 89 s, amplitude of 144 μm, and pulse-on/off cycle of 44/30 s. These process settings for 100 mg/L MWNTs in a 30 mL aliquot of deionized water would consume 863 J/mL of sonication energy. Contrary to the popular belief, "sonication time" and/or "sonication energy input" were not found to be proportional to the degree of dispersion of MWNTs in water. This might be the reason for the frequent disparity and nonreproducibility of sonication results reported in scientific literature, especially for dispersing nanomaterials in a number of different systems. The amplitude of vibration was noted to be the most sensitive parameter affecting MWNT aggregates' diameter and distribution in water. The characterization of MWNTs was performed using electron microscopy, surface area analyzer, thermogravimetric analyzer, and zeta potential analyzer. This study can be helpful in evaluating sonication dispersion of particulate matter in other incompressible fluids such as graphene dispersion in organic solvents | ||
| 650 | 4 | |a Journal Article | |
| 700 | 1 | |a Ahmad, Farrukh |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t ACS omega |d 2016 |g 4(2019), 1 vom: 31. Jan., Seite 849-859 |w (DE-627)NLM264243048 |x 2470-1343 |7 nnns |
| 773 | 1 | 8 | |g volume:4 |g year:2019 |g number:1 |g day:31 |g month:01 |g pages:849-859 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.1021/acsomega.8b02965 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 4 |j 2019 |e 1 |b 31 |c 01 |h 849-859 | ||