The Effect of Injection Molding Temperature on the Morphology and Mechanical Properties of PP/PET Blends and Microfibrillar Composites
Within this research the effect of injection molding temperature on polypropylene (PP)/poly(ethylene terephthalate) (PET) blends and microfibrillar composites was investigated. Injection molding blends (IMBs) and microfibrillar composites (MFCs) of PP/PET have been prepared in a weight ratio 70/30. The samples were processed at three different injection molding temperatures (Tim) (210, 230, 280 °C) and subjected to extensive characterization. The observations from the fracture surfaces of MFCs showed that PET fibers can be achieved by three step processing. The results indicated that Tim has a big influence on morphology of IMBs and MFCs. With increasing the Tim, distinctive variations in particle and fiber diameters were noticed. The differences in mechanical performances were obtained by flexural and impact tests. Establishing relationships between the processing parameters, properties, and morphology of composites is of key importance for the valorization of MFC polymers.
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2016 |
---|---|
Erschienen: |
2016 |
Enthalten in: |
Zur Gesamtaufnahme - volume:8 |
---|---|
Enthalten in: |
Polymers - 8(2016), 10 vom: 09. Okt. |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Kuzmanović, Maja [VerfasserIn] |
---|
Links: |
---|
Themen: |
Injection molding |
---|
Anmerkungen: |
Date Revised 30.09.2020 published: Electronic Citation Status PubMed-not-MEDLINE |
---|
doi: |
10.3390/polym8100355 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
NLM295956372 |
---|
LEADER | 01000naa a22002652 4500 | ||
---|---|---|---|
001 | NLM295956372 | ||
003 | DE-627 | ||
005 | 20231225084806.0 | ||
007 | cr uuu---uuuuu | ||
008 | 231225s2016 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.3390/polym8100355 |2 doi | |
028 | 5 | 2 | |a pubmed24n0986.xml |
035 | |a (DE-627)NLM295956372 | ||
035 | |a (NLM)30974630 | ||
035 | |a (PII)E355 | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
100 | 1 | |a Kuzmanović, Maja |e verfasserin |4 aut | |
245 | 1 | 4 | |a The Effect of Injection Molding Temperature on the Morphology and Mechanical Properties of PP/PET Blends and Microfibrillar Composites |
264 | 1 | |c 2016 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ƒaComputermedien |b c |2 rdamedia | ||
338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
500 | |a Date Revised 30.09.2020 | ||
500 | |a published: Electronic | ||
500 | |a Citation Status PubMed-not-MEDLINE | ||
520 | |a Within this research the effect of injection molding temperature on polypropylene (PP)/poly(ethylene terephthalate) (PET) blends and microfibrillar composites was investigated. Injection molding blends (IMBs) and microfibrillar composites (MFCs) of PP/PET have been prepared in a weight ratio 70/30. The samples were processed at three different injection molding temperatures (Tim) (210, 230, 280 °C) and subjected to extensive characterization. The observations from the fracture surfaces of MFCs showed that PET fibers can be achieved by three step processing. The results indicated that Tim has a big influence on morphology of IMBs and MFCs. With increasing the Tim, distinctive variations in particle and fiber diameters were noticed. The differences in mechanical performances were obtained by flexural and impact tests. Establishing relationships between the processing parameters, properties, and morphology of composites is of key importance for the valorization of MFC polymers | ||
650 | 4 | |a Journal Article | |
650 | 4 | |a injection molding | |
650 | 4 | |a mechanical properties | |
650 | 4 | |a microfibrillar composites | |
650 | 4 | |a morphology | |
650 | 4 | |a thermal properties | |
700 | 1 | |a Delva, Laurens |e verfasserin |4 aut | |
700 | 1 | |a Cardon, Ludwig |e verfasserin |4 aut | |
700 | 1 | |a Ragaert, Kim |e verfasserin |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Polymers |d 2010 |g 8(2016), 10 vom: 09. Okt. |w (DE-627)NLM205507980 |x 2073-4360 |7 nnns |
773 | 1 | 8 | |g volume:8 |g year:2016 |g number:10 |g day:09 |g month:10 |
856 | 4 | 0 | |u http://dx.doi.org/10.3390/polym8100355 |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a GBV_NLM | ||
951 | |a AR | ||
952 | |d 8 |j 2016 |e 10 |b 09 |c 10 |