Improvement on the Fatigue Performance of 2024-T4 Alloy by Synergistic Coating Technology
In this paper, rotating bending fatigue tests of 2024-T4 Al alloy with different oxide coatings were carried out. Compared to the uncoated and previously reported oxide coatings of aluminum alloys, the fatigue strength is able to be enhanced by using a novel oxide coating with sealing pore technology. These results indicate that the better the coating surface quality is, the more excellent the fatigue performance under rotating bending fatigue loading is. The improvement on the fatigue performance is mainly because the fatigue crack initiation and the early stage of fatigue crack growth at the coating layer can be delayed after PEO coating with pore sealing. Therefore, it is a so-called synergistic coating technology for various uses, including welding thermal cracks and filling micro-pores. The effects of different oxide coatings on surface hardness, compressive residual stress, morphology and fatigue fracture morphology are discussed. A critical compressive residual stress of about 95-100 MPa is proposed.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2014 |
|---|---|
| Erschienen: |
2014 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:7 |
|---|---|
| Enthalten in: |
Materials (Basel, Switzerland) - 7(2014), 5 vom: 06. Mai, Seite 3533-3546 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Wang, Xi-Shu [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Aluminum alloy |
|---|
| Anmerkungen: |
Date Revised 01.10.2020 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/ma7053533 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM274623048 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM274623048 | ||
| 003 | DE-627 | ||
| 005 | 20231225003859.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2014 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/ma7053533 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n0915.xml |
| 035 | |a (DE-627)NLM274623048 | ||
| 035 | |a (NLM)28788634 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Wang, Xi-Shu |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Improvement on the Fatigue Performance of 2024-T4 Alloy by Synergistic Coating Technology |
| 264 | 1 | |c 2014 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 01.10.2020 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a In this paper, rotating bending fatigue tests of 2024-T4 Al alloy with different oxide coatings were carried out. Compared to the uncoated and previously reported oxide coatings of aluminum alloys, the fatigue strength is able to be enhanced by using a novel oxide coating with sealing pore technology. These results indicate that the better the coating surface quality is, the more excellent the fatigue performance under rotating bending fatigue loading is. The improvement on the fatigue performance is mainly because the fatigue crack initiation and the early stage of fatigue crack growth at the coating layer can be delayed after PEO coating with pore sealing. Therefore, it is a so-called synergistic coating technology for various uses, including welding thermal cracks and filling micro-pores. The effects of different oxide coatings on surface hardness, compressive residual stress, morphology and fatigue fracture morphology are discussed. A critical compressive residual stress of about 95-100 MPa is proposed | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a aluminum alloy | |
| 650 | 4 | |a fatigue performance | |
| 650 | 4 | |a hard anodized | |
| 650 | 4 | |a plasma electrolytic oxidation | |
| 650 | 4 | |a synergistic coating | |
| 700 | 1 | |a Guo, Xing-Wu |e verfasserin |4 aut | |
| 700 | 1 | |a Li, Xu-Dong |e verfasserin |4 aut | |
| 700 | 1 | |a Ge, Dong-Yun |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Materials (Basel, Switzerland) |d 2009 |g 7(2014), 5 vom: 06. Mai, Seite 3533-3546 |w (DE-627)NLM208535349 |x 1996-1944 |7 nnns |
| 773 | 1 | 8 | |g volume:7 |g year:2014 |g number:5 |g day:06 |g month:05 |g pages:3533-3546 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/ma7053533 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 7 |j 2014 |e 5 |b 06 |c 05 |h 3533-3546 | ||