Fiber-solid, hybrid, single-frequency laser (100 W) with a 100 MHz repetition rate and 1 ns pulse width from a spherical aberration compensated four-stage Nd:YVO₄ amplifier

A pulsed laser for laser guide stars with a 100 MHz repetition rate and 1 ns pulse width was achieved by external modulation of a continuous wave (CW) laser with a 70 kHz spectrum width. The laser is amplified first by two fiber pre-amplifiers and then by four solid-state power amplifiers. The laser achieves gains as high as 36 dB in the fiber pre-amplifiers due to the long gain medium length. The output power from the fiber amplifiers is 2.1 W. The laser receives further amplification in the solid-state amplifiers and retains good beam quality by aberration compensation. The final output average power is 102.9 W, and the beam quality factor M² is 1.46. The laser reaches high power without spectrum width and pulse width broadening at the 100 MHz repetition rate. The spectrum width of the pulsed laser is less than 0.8 GHz, which is close to the Fourier transform limit. Such a laser with single-frequency, high-repetition, and high-power features along with good beam quality will be valuable for many research areas.

Medienart:

E-Artikel

Erscheinungsjahr:

2014

Erschienen:

2014

Enthalten in:

Zur Gesamtaufnahme - volume:53

Enthalten in:

Applied optics - 53(2014), 22 vom: 01. Aug., Seite 5058-63

Sprache:

Englisch

Beteiligte Personen:

Zhang, Xiang [VerfasserIn]
Wang, Yi [VerfasserIn]
Liu, Bin [VerfasserIn]
Wang, Chunhua [VerfasserIn]
Xiang, Zhen [VerfasserIn]
Liu, Chong [VerfasserIn]

Links:

Volltext

Themen:

Journal Article

Anmerkungen:

Date Completed 21.05.2015

Date Revised 23.10.2018

published: Print

Citation Status PubMed-not-MEDLINE

doi:

10.1364/AO.53.005058

funding:

Förderinstitution / Projekttitel:

PPN (Katalog-ID):

NLM240682610