Degree of conversion of two self-adhesive resin luting cements through different lengths of fiber post
PURPOSE: To evaluate the degree of conversion (DoC) of self-adhesive resin luting cements when irradiated through different fiber post lengths.
METHODS: A total of 60 teeth were sectioned to achieve lengths of 4 mm, 7 mm, and 10 mm, while 60 fiber posts were trimmed to give 3 mm, 6 mm, and 9 mm lengths. Post space was created to accommodate the fiber post and 1 mm of luting cement apically. Two self-adhesive resin luting cements (Multilink Speed and RelyX U200) were used. A total of four cycles of 20 s irradiation was done with an attenuated total reflectance Fourier transform infrared spectroscopy reading between each cycle.
RESULTS: The mean ± standard deviation DoC achieved with a light-emitting diode and quartz tungsten halogen for Multilink Speed was 67.4 ± 2.7% and 72.4 ± 4.0%, respectively, while for RelyX U200, the corresponding values were 56.5 ± 2.7% and 62.0 ± 3.8%, respectively. For Multilink Speed, there was no significant difference between the control and the 3 mm group, while for RelyX U200, no significant difference was found between the 6 mm and 9 mm groups. All the other groups showed significant differences.
CONCLUSION: The DoC reduced as the post length increased.
Medienart: |
E-Artikel |
---|
Erscheinungsjahr: |
2021 |
---|---|
Erschienen: |
2021 |
Enthalten in: |
Zur Gesamtaufnahme - volume:63 |
---|---|
Enthalten in: |
Journal of oral science - 63(2021), 2 vom: 31. März, Seite 125-128 |
Sprache: |
Englisch |
---|
Beteiligte Personen: |
Khabeer, Abdul [VerfasserIn] |
---|
Links: |
---|
Themen: |
Curing lights |
---|
Anmerkungen: |
Date Completed 02.04.2021 Date Revised 02.04.2021 published: Print-Electronic Citation Status MEDLINE |
---|
doi: |
10.2334/josnusd.20-0410 |
---|
funding: |
|
---|---|
Förderinstitution / Projekttitel: |
|
PPN (Katalog-ID): |
NLM31926002X |
---|
LEADER | 01000naa a22002652 4500 | ||
---|---|---|---|
001 | NLM31926002X | ||
003 | DE-627 | ||
005 | 20231225171057.0 | ||
007 | cr uuu---uuuuu | ||
008 | 231225s2021 xx |||||o 00| ||eng c | ||
024 | 7 | |a 10.2334/josnusd.20-0410 |2 doi | |
028 | 5 | 2 | |a pubmed24n1064.xml |
035 | |a (DE-627)NLM31926002X | ||
035 | |a (NLM)33361691 | ||
040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
041 | |a eng | ||
100 | 1 | |a Khabeer, Abdul |e verfasserin |4 aut | |
245 | 1 | 0 | |a Degree of conversion of two self-adhesive resin luting cements through different lengths of fiber post |
264 | 1 | |c 2021 | |
336 | |a Text |b txt |2 rdacontent | ||
337 | |a ƒaComputermedien |b c |2 rdamedia | ||
338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
500 | |a Date Completed 02.04.2021 | ||
500 | |a Date Revised 02.04.2021 | ||
500 | |a published: Print-Electronic | ||
500 | |a Citation Status MEDLINE | ||
520 | |a PURPOSE: To evaluate the degree of conversion (DoC) of self-adhesive resin luting cements when irradiated through different fiber post lengths | ||
520 | |a METHODS: A total of 60 teeth were sectioned to achieve lengths of 4 mm, 7 mm, and 10 mm, while 60 fiber posts were trimmed to give 3 mm, 6 mm, and 9 mm lengths. Post space was created to accommodate the fiber post and 1 mm of luting cement apically. Two self-adhesive resin luting cements (Multilink Speed and RelyX U200) were used. A total of four cycles of 20 s irradiation was done with an attenuated total reflectance Fourier transform infrared spectroscopy reading between each cycle | ||
520 | |a RESULTS: The mean ± standard deviation DoC achieved with a light-emitting diode and quartz tungsten halogen for Multilink Speed was 67.4 ± 2.7% and 72.4 ± 4.0%, respectively, while for RelyX U200, the corresponding values were 56.5 ± 2.7% and 62.0 ± 3.8%, respectively. For Multilink Speed, there was no significant difference between the control and the 3 mm group, while for RelyX U200, no significant difference was found between the 6 mm and 9 mm groups. All the other groups showed significant differences | ||
520 | |a CONCLUSION: The DoC reduced as the post length increased | ||
650 | 4 | |a Journal Article | |
650 | 4 | |a FTIR | |
650 | 4 | |a curing lights | |
650 | 4 | |a degree of conversion | |
650 | 4 | |a fiber posts | |
650 | 4 | |a resin cement | |
650 | 7 | |a Dental Cements |2 NLM | |
650 | 7 | |a Dental Materials |2 NLM | |
650 | 7 | |a Glass Ionomer Cements |2 NLM | |
650 | 7 | |a Resin Cements |2 NLM | |
700 | 1 | |a Ahmed, Syed Z |e verfasserin |4 aut | |
700 | 1 | |a Zubair, Mukarram |e verfasserin |4 aut | |
700 | 1 | |a Faridi, Muhammad A |e verfasserin |4 aut | |
700 | 1 | |a Al-Harthi, Mamdouh A |e verfasserin |4 aut | |
773 | 0 | 8 | |i Enthalten in |t Journal of oral science |d 1998 |g 63(2021), 2 vom: 31. März, Seite 125-128 |w (DE-627)NLM096037733 |x 1880-4926 |7 nnns |
773 | 1 | 8 | |g volume:63 |g year:2021 |g number:2 |g day:31 |g month:03 |g pages:125-128 |
856 | 4 | 0 | |u http://dx.doi.org/10.2334/josnusd.20-0410 |3 Volltext |
912 | |a GBV_USEFLAG_A | ||
912 | |a GBV_NLM | ||
951 | |a AR | ||
952 | |d 63 |j 2021 |e 2 |b 31 |c 03 |h 125-128 |