High-precision processing method for an aluminum mirror assisted with a femtosecond laser
At present, aluminum-based optical payloads are widely used in the aviation and aerospace field, and the demand for aluminum mirrors has become increasingly urgent in the visible light region. The main processing of an aluminum alloy mirror involves single-point diamond turning followed by a combined polishing process. Among these processes, magnetorheological finishing (MRF) is an important method for improving a surface figure. During the MRF process, excessive impurity contaminants are introduced into the surface of the aluminum mirror, thereby reducing surface reflectivity. In this paper, theoretical analysis and time-of-flight secondary ion mass spectrometry depth profiling were used to obtain the cause of pollution, and the process scheme of femtosecond laser cleaning was proposed. After verifying the feasibility, a new, to the best of our knowledge, process route was implemented on a Φ50mm aluminum mirror. Finally, the surface figure of RMS 0.022λ and the surface roughness of Ra 3.24 nm were obtained. In addition, reflectance in the visible light and near-infrared bands has increased by about 50%.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2020 |
|---|---|
| Erschienen: |
2020 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:59 |
|---|---|
| Enthalten in: |
Applied optics - 59(2020), 27 vom: 20. Sept., Seite 8335-8341 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Zhao, Tao [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
|---|
| Anmerkungen: |
Date Revised 28.09.2020 published: Print Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.1364/AO.400746 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM315471786 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM315471786 | ||
| 003 | DE-627 | ||
| 005 | 20231225155004.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2020 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1364/AO.400746 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1051.xml |
| 035 | |a (DE-627)NLM315471786 | ||
| 035 | |a (NLM)32976419 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Zhao, Tao |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a High-precision processing method for an aluminum mirror assisted with a femtosecond laser |
| 264 | 1 | |c 2020 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 28.09.2020 | ||
| 500 | |a published: Print | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a At present, aluminum-based optical payloads are widely used in the aviation and aerospace field, and the demand for aluminum mirrors has become increasingly urgent in the visible light region. The main processing of an aluminum alloy mirror involves single-point diamond turning followed by a combined polishing process. Among these processes, magnetorheological finishing (MRF) is an important method for improving a surface figure. During the MRF process, excessive impurity contaminants are introduced into the surface of the aluminum mirror, thereby reducing surface reflectivity. In this paper, theoretical analysis and time-of-flight secondary ion mass spectrometry depth profiling were used to obtain the cause of pollution, and the process scheme of femtosecond laser cleaning was proposed. After verifying the feasibility, a new, to the best of our knowledge, process route was implemented on a Φ50mm aluminum mirror. Finally, the surface figure of RMS 0.022λ and the surface roughness of Ra 3.24 nm were obtained. In addition, reflectance in the visible light and near-infrared bands has increased by about 50% | ||
| 650 | 4 | |a Journal Article | |
| 700 | 1 | |a Hu, Hao |e verfasserin |4 aut | |
| 700 | 1 | |a Peng, Xiao-Qiang |e verfasserin |4 aut | |
| 700 | 1 | |a Guan, Chao-Liang |e verfasserin |4 aut | |
| 700 | 1 | |a Dai, Yi-Fan |e verfasserin |4 aut | |
| 700 | 1 | |a Yong, Jia-Hao |e verfasserin |4 aut | |
| 700 | 1 | |a Gan, Zi-Hao |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Applied optics |d 1966 |g 59(2020), 27 vom: 20. Sept., Seite 8335-8341 |w (DE-627)NLM114401330 |x 1539-4522 |7 nnns |
| 773 | 1 | 8 | |g volume:59 |g year:2020 |g number:27 |g day:20 |g month:09 |g pages:8335-8341 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.1364/AO.400746 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 59 |j 2020 |e 27 |b 20 |c 09 |h 8335-8341 | ||