Influence of Different Types of Peroxides on the Long-Chain Branching of PP via Reactive Extrusion
Long-chain branching (LCB) is known as a suitable method to increase the melt strength behavior of linear polypropylene (PP), which is a fundamental weakness of this material. This enables the modification of various properties of PP, which can then be used-in the case of PP recyclates-as a practical "upcycling" method. In this study, the effect of five different peroxides and their effectiveness in building LCB as well as the obtained mechanical properties were studied. A single screw extruder at different temperatures (180 and 240 °C) was used, and long-chain branched polypropylene (PP-LCB) was prepared via reactive extrusion by directly mixing the peroxides. The peroxides used were dimyristyl peroxydicarbonate (PODIC C126), tert-butylperoxy isopropylcarbonate (BIC), tert-Butylperoxy 2-ethylhexyl carbonate (BEC), tert-amylperoxy 2-ethylhexylcarbonate (AEC), and dilauroyl peroxide (LP), all with a concentration of 20 mmol/kg. The influence of the temperature on the competitive prevalent reactions of degradation and branching was documented via melt mass-flow rate (MFR), rheology measurements, and gel permeation chromatography (GPC). However, via extensional rheology, strain hardening could be observed in all cases and the mechanical properties could be maintained or even improved. Particularly, PODIC C126 and LP signaled a promising possibility for LCB in this study.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2020 |
|---|---|
| Erschienen: |
2020 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:12 |
|---|---|
| Enthalten in: |
Polymers - 12(2020), 4 vom: 11. Apr. |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Stanic, Sascha [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Journal Article |
|---|
| Anmerkungen: |
Date Revised 28.03.2024 published: Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.3390/polym12040886 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM308754611 |
|---|
| LEADER | 01000caa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM308754611 | ||
| 003 | DE-627 | ||
| 005 | 20240328234301.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2020 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.3390/polym12040886 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1352.xml |
| 035 | |a (DE-627)NLM308754611 | ||
| 035 | |a (NLM)32290464 | ||
| 035 | |a (PII)E886 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Stanic, Sascha |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Influence of Different Types of Peroxides on the Long-Chain Branching of PP via Reactive Extrusion |
| 264 | 1 | |c 2020 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Revised 28.03.2024 | ||
| 500 | |a published: Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a Long-chain branching (LCB) is known as a suitable method to increase the melt strength behavior of linear polypropylene (PP), which is a fundamental weakness of this material. This enables the modification of various properties of PP, which can then be used-in the case of PP recyclates-as a practical "upcycling" method. In this study, the effect of five different peroxides and their effectiveness in building LCB as well as the obtained mechanical properties were studied. A single screw extruder at different temperatures (180 and 240 °C) was used, and long-chain branched polypropylene (PP-LCB) was prepared via reactive extrusion by directly mixing the peroxides. The peroxides used were dimyristyl peroxydicarbonate (PODIC C126), tert-butylperoxy isopropylcarbonate (BIC), tert-Butylperoxy 2-ethylhexyl carbonate (BEC), tert-amylperoxy 2-ethylhexylcarbonate (AEC), and dilauroyl peroxide (LP), all with a concentration of 20 mmol/kg. The influence of the temperature on the competitive prevalent reactions of degradation and branching was documented via melt mass-flow rate (MFR), rheology measurements, and gel permeation chromatography (GPC). However, via extensional rheology, strain hardening could be observed in all cases and the mechanical properties could be maintained or even improved. Particularly, PODIC C126 and LP signaled a promising possibility for LCB in this study | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a long-chain branching | |
| 650 | 4 | |a peroxide | |
| 650 | 4 | |a polypropylene | |
| 650 | 4 | |a reactive extrusion | |
| 650 | 4 | |a strain hardening | |
| 700 | 1 | |a Gottlieb, Gergö |e verfasserin |4 aut | |
| 700 | 1 | |a Koch, Thomas |e verfasserin |4 aut | |
| 700 | 1 | |a Göpperl, Lukas |e verfasserin |4 aut | |
| 700 | 1 | |a Schmid, Klaus |e verfasserin |4 aut | |
| 700 | 1 | |a Knaus, Simone |e verfasserin |4 aut | |
| 700 | 1 | |a Archodoulaki, Vasiliki-Maria |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t Polymers |d 2010 |g 12(2020), 4 vom: 11. Apr. |w (DE-627)NLM205507980 |x 2073-4360 |7 nnns |
| 773 | 1 | 8 | |g volume:12 |g year:2020 |g number:4 |g day:11 |g month:04 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.3390/polym12040886 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 12 |j 2020 |e 4 |b 11 |c 04 | ||