Anisotropic CoFe2O4Graphene Hybrid Aerogels with High Flux and Excellent Stability as Building Blocks for Rapid Catalytic Degradation of Organic Contaminants in a Flow-Type Setup
Macroscopic three-dimensional catalytic materials could overcome the poor operability and avoid secondary pollution of common powdery counterparts, especially in flow-type setups. However, conventional isotropic graphene-based aerogels and foams have randomly distributed graphene sheets, which may cause stream erosion and reduce the flux seriously. Herein, for the first time, we design and fabricate a novel anisotropic CoFe2O4graphene hybrid aerogel (CFO@GA-A) with a hydrothermal synthesis followed by directional-freezing and freeze-drying for a tube-like flow-type setup analogous to a wastewater discharge pipeline. The long and vertically aligned pores inside the aerogel provide an exceptional flux of 1100 L m-2 h-1, 450% higher than that of the rough and zigzag paths in the isotropic CoFe2O4@graphene hybrid aerogel (CFO@GA-I), and the leaching of metal ions is obviously inhibited by relieving the erosion of CoFe2O4. Besides, the CFO@GA-A could sustain the scour of high-speed flowing wastewater and maintain its structural stability. Therefore, organic contaminants of indigo carmine, methyl orange, orange II, malachite green, phenol, and norfloxacin could readily flow over the nanocatalysts and be degraded rapidly within 7.5-12.5 min at varied flow rates from 60 to 120 mL h-1. The CFO@GA-A also exhibits a much better long-term stability with removal efficiencies toward indigo carmine at 100%, 91%, and 85% for at least 30 h (60 mL h-1), 25 h (90 mL h-1), and 21 h (120 mL h-1), respectively. On the contrary, the CFO@GA-I exhibits unsatisfactory removal efficiencies of <40%. Interestingly, CFO@GA-A could also serve as building blocks to stack on each other for degrading intense flowing wastewater, exhibiting an outstanding composability. The high-flux and long-term stability make the CFO@GA-A promising as an ideal catalytic material for wastewater treatments.
| Medienart: |
E-Artikel |
|---|
| Erscheinungsjahr: |
2019 |
|---|---|
| Erschienen: |
2019 |
| Enthalten in: |
Zur Gesamtaufnahme - volume:11 |
|---|---|
| Enthalten in: |
ACS applied materials & interfaces - 11(2019), 37 vom: 18. Sept., Seite 34222-34231 |
| Sprache: |
Englisch |
|---|
| Beteiligte Personen: |
Yu, Xiao-Jie [VerfasserIn] |
|---|
| Links: |
|---|
| Themen: |
Anisotropic graphene aerogel |
|---|
| Anmerkungen: |
Date Completed 30.09.2019 Date Revised 30.09.2019 published: Print-Electronic Citation Status PubMed-not-MEDLINE |
|---|
| doi: |
10.1021/acsami.9b10287 |
|---|
| funding: |
|
|---|---|
| Förderinstitution / Projekttitel: |
|
| PPN (Katalog-ID): |
NLM300356617 |
|---|
| LEADER | 01000naa a22002652 4500 | ||
|---|---|---|---|
| 001 | NLM300356617 | ||
| 003 | DE-627 | ||
| 005 | 20231225102340.0 | ||
| 007 | cr uuu---uuuuu | ||
| 008 | 231225s2019 xx |||||o 00| ||eng c | ||
| 024 | 7 | |a 10.1021/acsami.9b10287 |2 doi | |
| 028 | 5 | 2 | |a pubmed24n1001.xml |
| 035 | |a (DE-627)NLM300356617 | ||
| 035 | |a (NLM)31425650 | ||
| 040 | |a DE-627 |b ger |c DE-627 |e rakwb | ||
| 041 | |a eng | ||
| 100 | 1 | |a Yu, Xiao-Jie |e verfasserin |4 aut | |
| 245 | 1 | 0 | |a Anisotropic CoFe2O4Graphene Hybrid Aerogels with High Flux and Excellent Stability as Building Blocks for Rapid Catalytic Degradation of Organic Contaminants in a Flow-Type Setup |
| 264 | 1 | |c 2019 | |
| 336 | |a Text |b txt |2 rdacontent | ||
| 337 | |a ƒaComputermedien |b c |2 rdamedia | ||
| 338 | |a ƒa Online-Ressource |b cr |2 rdacarrier | ||
| 500 | |a Date Completed 30.09.2019 | ||
| 500 | |a Date Revised 30.09.2019 | ||
| 500 | |a published: Print-Electronic | ||
| 500 | |a Citation Status PubMed-not-MEDLINE | ||
| 520 | |a Macroscopic three-dimensional catalytic materials could overcome the poor operability and avoid secondary pollution of common powdery counterparts, especially in flow-type setups. However, conventional isotropic graphene-based aerogels and foams have randomly distributed graphene sheets, which may cause stream erosion and reduce the flux seriously. Herein, for the first time, we design and fabricate a novel anisotropic CoFe2O4graphene hybrid aerogel (CFO@GA-A) with a hydrothermal synthesis followed by directional-freezing and freeze-drying for a tube-like flow-type setup analogous to a wastewater discharge pipeline. The long and vertically aligned pores inside the aerogel provide an exceptional flux of 1100 L m-2 h-1, 450% higher than that of the rough and zigzag paths in the isotropic CoFe2O4@graphene hybrid aerogel (CFO@GA-I), and the leaching of metal ions is obviously inhibited by relieving the erosion of CoFe2O4. Besides, the CFO@GA-A could sustain the scour of high-speed flowing wastewater and maintain its structural stability. Therefore, organic contaminants of indigo carmine, methyl orange, orange II, malachite green, phenol, and norfloxacin could readily flow over the nanocatalysts and be degraded rapidly within 7.5-12.5 min at varied flow rates from 60 to 120 mL h-1. The CFO@GA-A also exhibits a much better long-term stability with removal efficiencies toward indigo carmine at 100%, 91%, and 85% for at least 30 h (60 mL h-1), 25 h (90 mL h-1), and 21 h (120 mL h-1), respectively. On the contrary, the CFO@GA-I exhibits unsatisfactory removal efficiencies of <40%. Interestingly, CFO@GA-A could also serve as building blocks to stack on each other for degrading intense flowing wastewater, exhibiting an outstanding composability. The high-flux and long-term stability make the CFO@GA-A promising as an ideal catalytic material for wastewater treatments | ||
| 650 | 4 | |a Journal Article | |
| 650 | 4 | |a CoFeO | |
| 650 | 4 | |a anisotropic graphene aerogel | |
| 650 | 4 | |a catalytic degradation | |
| 650 | 4 | |a organic contaminants | |
| 650 | 4 | |a peroxymonosulfate | |
| 700 | 1 | |a Qu, Jin |e verfasserin |4 aut | |
| 700 | 1 | |a Yuan, Zuoying |e verfasserin |4 aut | |
| 700 | 1 | |a Min, Peng |e verfasserin |4 aut | |
| 700 | 1 | |a Hao, Shu-Meng |e verfasserin |4 aut | |
| 700 | 1 | |a Zhu, Zhong-Shuai |e verfasserin |4 aut | |
| 700 | 1 | |a Li, Xiaofeng |e verfasserin |4 aut | |
| 700 | 1 | |a Yang, Dongzhi |e verfasserin |4 aut | |
| 700 | 1 | |a Yu, Zhong-Zhen |e verfasserin |4 aut | |
| 773 | 0 | 8 | |i Enthalten in |t ACS applied materials & interfaces |d 2009 |g 11(2019), 37 vom: 18. Sept., Seite 34222-34231 |w (DE-627)NLM194100049 |x 1944-8252 |7 nnns |
| 773 | 1 | 8 | |g volume:11 |g year:2019 |g number:37 |g day:18 |g month:09 |g pages:34222-34231 |
| 856 | 4 | 0 | |u http://dx.doi.org/10.1021/acsami.9b10287 |3 Volltext |
| 912 | |a GBV_USEFLAG_A | ||
| 912 | |a GBV_NLM | ||
| 951 | |a AR | ||
| 952 | |d 11 |j 2019 |e 37 |b 18 |c 09 |h 34222-34231 | ||